 |
 |
|
|
|
 |
| Star Pressure Plus Calibrator |
| Manufacturer: 3D Instruments |
| |
The Star Pressure Plus Calibrator is a rugged, portable digital pressure calibrator from 3D Instruments. This multi-functional instrument incorporates "state of the art" digital pressure and electrical measurement technologies.
Signal outputs from the integral pressure sensors are supplied ot a 16 bit analog-to-digital converter for processing, filtering and control. This circuitry design provides for high accuracy of 0.05% full scale for pressure over the entire operating temperature range of 0° to 50 °. Pressure sensors can be supplied from 2 to 5000 psig. For corrosive media applications, 316SS isolated sensors are available.
The Star Pressure Plus Calibrator is housed in a waterproof Nema-4x ABS case, which has an ergonomic design for ease of operation. All controls incl., power, zero and engineering unit selection, are via a sealed membrane keypad for reliable operation in adverse weather conditions. A robust urethane enclosure protector provides for industrial ruggedness and shockproofing.
The combination of high accuracy measurement technologies, robust design and a wide array of pressure ranges makes the Star Pressure Plus Calibrator System the ideal choice to tackle your demanding pressure and electrical monitoring, test and calibration applications. |
|
| |
Features:
- Dual pressure sensor capability - single or dual sensor models available
- High Accuracy - pressure-0.05% of full scale; elect.-0.025% of full scale
- Temperature compensation - provides for high accuracy pressure measurements over an operating range of 0° - 50° C
- Versatility - pressure ranges from 2 to 5000 psig. 316SS and differential sensor versions available
- Communications - download information via RS-232 data port to a computer
- Robust design - "anti-shock" urethane enclosure protector
- Safety - designed to comply with safety codes for use in Class 1, Div. 1, Grps A, B, C & D areas. CE mark attained.
- Connectivity - designed to interface with voltage & current output transmitters.
- Pressure switch evaluator - tests deadband, switch point and reset point
- Loop power - 24 VDC source
- Min/Max data value storage/retrieval
Specifications
| PERFORMANCE |
| Pressure: |
0.05% FS ± 1 LSD |
| Includes all variations due to: |
temperature, hysteresis, and non-linearity and repeatability |
| Electrical: |
0.025% FS ± 1 LSD |
| Environmental effects: |
Pressure: none over the operating temperature range
Electrical: 0.002% of full scale/°C outside 23 ± 3°C |
| ENVIRONMENTAL |
| Operating temperature range: |
0 - 50°C |
| Storage temperature range: |
-10 - 55°C |
| PRESSURE SENSORS |
| Psig - Isolated |
| Range |
Code |
Range |
Code |
| 0-15 |
15 |
0-500 |
27 |
| 0-30 |
21 |
0-1000 |
29 |
| 0-100 |
23 |
0-3000 |
33 |
| 0-250 |
46 |
0 - 5000 |
35 |
| Psig - Non-Isolated |
| Range |
Code |
Range |
Code |
| 0-2 |
91 |
0-100 |
95 |
| 0-5 |
92 |
-14.7-0-15 |
79 |
| 0-15 |
93 |
-14.7-0-30 |
80 |
| 0-30 |
94 |
-14.7-0-100 |
82 |
| Psid - Non-Isolated |
| Range |
Code |
Range |
Code |
| 0-5 |
86 |
0-100 |
90 |
| 0-30 |
88 |
|
|
| Psia - Isolated |
| Range |
Code |
Range |
Code |
| 0-500 |
57 |
|
|
| Psia - Non-Isolated |
| Range |
Code |
Range |
Code |
| 0-15 |
72 |
0-100 |
75 |
| 0-30 |
73 |
|
|
|
| Media Compatibility |
| Non-isolated: Non-corrosive gases or liquids |
| Isolated: Any media compatible with 316SS |
| Overpressure |
| Acceptable operating pressure ranges, without damage or shift in calibration, as follows: |
|
Isolated: 2x full scale pressure
Non-Isolated: 3x full scale or 200 psi max (whichever is less); 20 psi for 2 and 5 psi sensors |
| ENGINEERING UNITS |
Engr. units*: Bar; Kg/cm²; Psi (Psia); mmHg; mHg; Bar; kPa; mPa; inH O-4°C; inHO-20°C; ftHO-4°C; ftHO-20°C; cmHO-4°C; cmHO-20°C; mHO-4°C; mHO-20°C
(engr. unit availability depends on sensor range selected) |
| ELECTRICAL |
| Electrical ranges: |
0-10 vdc/0-24mA |
| Battery: |
Alkaline (4-AA size) 25 hour life nominal @ 25°C. (w/o using 24vdc loop power) |
| Power saving: |
auto shut-off after approximately 20 minutes. |
| PHYSICAL |
| Connections: |
Pressure-1/8" NPTF nickel-plated brass;
Electrical-Standard Banana Jack |
| Display: |
2 line, 16 character LCD
4 1/2 digit floating point |
| Housing: |
High density, ABS |
| Dimensions: |
8.4"L x 4.3"W x 2.3"D |
| Weight: |
Approximately 2.0 lbs. |
|
|
 |
|
;)
