 |
 |
|
|
|
 |
| Low Pressure Gauges |
| Manufacturer: 3D Instruments |
| |
Accurate and reliable low pressure gauges available in 4 1/2"
Dyna-mount cases and stainless steel cases.
Benefits:
- Application flexibility, bottom or back mount in one unit
- Longer service life
- Rezero capability
- Corrosion resistance |
|
| |
Features:
- Adjustable Dyna-mount fitting and flange
- Adjustable zero setting
- Standard changeable filter
- All wetted surfaces stainless steel construction
- 150% Overpressure with no effect on calibration
- 500% Burst pressure
- Design tested to 500,000 cycles
- Ranges available from 0-25 inches of water (60 mbar) to 15 psig (1000 mbar)
- Fitting size changeable in the field
| Specifications |
| Pressure Ranges: |
25 inches (60 mbar) of water to 15 psig (1000 mbar) |
MOD CODE LISTING
None - "psig" and "in H2O" ranges / scales
"ISZ" - "oz/in2" ranges /scales
"ISB" - "mbar" or "bar" ranges/scales
"ISO" - "kPa" ranges/scales
"ISK" - "kgf/cm2" and "mm H20" ranges/ scales
"ISZD" - Dual scale with "oz/in2" inner scale and "psig"or "in H2O" outer scale
"ISBD" - Dual scale with "mbar" inner scale and "psig"' or "in H2O" outer scale
"ISOD" - Dual scale with "kPa" inner scale and "psig" or "in H2O" outer scale
"ISKD" - Dual scale with "kgf/cm2" or "mm H2O" inner scale and "psig" / "in H2O" outer scale
"CPB" - 0 to 100% linear scale for receiver gauge
"CPA" - 0 to 10 square root scale for receiver gauge
"GCG" - Optional 1.0 % (of Span) Accuracy
"GBT" - Optional Laminated Glass Crystal (Stainless Steel Case Only)
Note: More than one Mod Code can be used at the end of the model number.
|
| Accuracy: |
+/- 2.0% of full scale +/- 1.0% |
| Ambient Temperature: |
-65 deg. F to 190 deg. F (-54 deg. C too 88 deg. C) |
| Proof Pressure: |
150% full scale no calibration shift |
| Burst Pressure: |
500% of full scale |
| Operating Media: |
Any gas media suitable for contact with 316 stainless steel |
| Materials |
| Sensing Element: |
Stainless steel |
| Fitting: |
316 stainless steel |
| Dial: |
300 series stainless steel |
| Movement: |
Brass |
| Stainless Steel Case Materials |
| Case: |
300 series stainless steel electro-polished |
| Crystal: |
Acrylic (or optional glass) |
| Flange: |
300 series stainless steel (optional) |
| High Impact Plastic Case Materials |
| Case: |
High impact resistant Cycolac Plastic |
| Crystal: |
Acrylic |
| Flange: |
High impact resistant |
|
ORDERING INFORMATION Model Number 25584 - WW X Y Z
- WW=PRESSURE RANGE
- X=FITTING
- Y=FLANGE/FITTING POSITION
- Z=CASE
| |
| FLANGE/FITTING POSITION(Y) |
| 1 |
front/bottom |
| 2 |
front/back |
| 3 |
back/bottom |
| 4 |
back/back |
| 5 |
none/bottom |
| 6 |
none/back |
| 7 |
detached/bottom(ABS only) |
| 8 |
detached/back(ABS only) | |
| PRESSURE RANGE(WW) |
| -03 |
0-25 inches of H2O |
60 mbar |
| -04 |
0-30 inches of H2O |
75 mbar |
| -05 |
0-40 inches of H2O |
100 mbar |
| -06 |
0-60 inches of H2O |
160 mbar |
| -08 |
0-100 inches of H2O |
250 mbar |
| -09 |
0-5 psig |
350 mbar |
| -11 |
0-200 inches of H2O |
500 mbar |
| -14 |
0-300 inches of H2O |
750 mbar |
| -15 |
0-15 psig |
1000 mbar |
| -17 |
0-400 inches of H2O |
1000 mbar | |
| FITTING(X) |
| B |
1/4 NPTM |
| C |
1/2 NPTM | |
| CASE(Z) |
| 1 |
black ABS Plastic |
| 4 |
yellow ABS Plastic |
| 5 |
stainless steel | | |
|
|
 |
|
;)
