 |
 |
|
|
|
 |
| P Series PressureVacuum Gauges |
| Manufacturer: Alicat Scientific |
| |
Alicat Scientific's line of P Series Digital Pressure/Vacuum Gauges offer customers a variety of cost saving features.
Alicat P series pressure/vacuum gauges are:
Precise Digital pressure/vacuum display offer more resolution and are easier to read than dial type gauges.
Versatile A variety of output options from 0-5V, 0-10V and 4-20mA as well as seamless integration with other compatible flow products on one RS-232 line.
Fast Quick response speeds show users the most minimal pressure/vacuum fluctuations.
Cheap to operate Low power consumption and minimal maintenance.
Rugged Standard 302SS flow body with aluminum case housing looks good and provides long service life.
Accurate and Repeatable Accurate to 0.5% of full scale and repeatable to 0.5% of full scale.
All Alicat P series pressure gauge calibrations are NIST traceable.
Digital Pressure/Vacuum gauges are used to:
- perform leak checks
- verify equipment operation
- check pressure/vacuum in process applications
|
|
| |
Features
Measured Parameters
P Series Pressure/Vacuum Gauge
Pressure/Vacuum (PSIA or PSIG)
Versatility
- Interfaces easily with Alicat flow products via RS-232 addressability
- Tunable for application specific response
- Multiple digital & analog input/output
- Signal outputs include 0-5Vdc, 0-10Vdc, 4-20mA, or RS-232
- Units range from -30inHg-0PSIG; 0-30PSIA; 0-1000PSIG
- Add the optional battery pack and digital display for a precision calibration and/or testing device that can be used in the field.
- 200:1 turndown ratio allow gauge to measure 1/200th of its full scale potential
- Small size. 4.1"H X 2.4"W X 1.1"D
- Factory set to one of nine units of measure
- Can be used for pressure, vacuum or differential pressure measurement
- Remote Display for embedded applications
- Pressure/Vacuum measurement in different physical locations of the system, but with the same Programmable Logic Controller (PLC).
Communication
- RS-232 output of all measured parameters
- 0-5Vdc output of main parameter
- Local Display Control
Media
- Dry, non-corrosive gases.*
*Optional sensors are available for water and some mild corrosives, please contact factory with media information.
Customization
- Alternate Units of Measure
- Tailored orifice sizing
- Sensors for water
- Sensors for some corrosives
- Battery pack for portable operation
- Locking 6-pin electrical connection
- DB-15 connection
- No Display Units for OEMs
|
|
 |
|
