The Type F3.05 No-Flow Switches offer reliable pump protection. They open an electrical circuit when flow velocity decreases below 0.15 m/s (0.5 ft./sec.) and are not adjustable. The unique Halar® paddle wheel design is not available from other manufacturers.
|
Type F3.05
|
| Body Materials: |
CPVC, PVDF, 316L Stainless Steel, Brass |
| Rotor: |
ECTFE (Halar®) |
| Shaft & Bearings: |
Ceramic |
| Seals: |
EPDM, Viton® |
| Pipe Sizes: |
1/2"– 24" in two sensor lengths,
L0 or L1. See Installation Fittings |
| Velocity Trip Point: |
0.15 m/s (0.5 ft./sec.) not adjustable. The normally
open contact closes after a delay of 2 seconds. |
| Visual Flow Indiction: |
Bicolour LED
Red=No Flow, Green=Flow
|
| Relay Output: |
Mechanical SPST contact,
No Flow=open contact
1A @ 24 VDC, 0.5A @ 125 VAC,
0.1A @ 230 VAC |
;)
