The B/W 7014 and 7010 float switch products offer an economical solution to clean liquid point level measurement.

Multiple switch points
The B/W float switches offer single point or up to 12 switch points on a single guide tube.

Direct or Indirect operation
Switches can close on rising level or open on rising level

Suitable for many Applications
Applicable to clean liquids for high or low level indication, pump control, and stop fill on storage vessels.

Reliable mechanical point level switches for use in many clean liquids applications. Float switches provide general-purpose point level device at an economical price. Simple installation and reliable operation make floats a good choice for many point level applications.

B/W float switches provide reed switch or mechanical switch outputs that can connected to B/W relay Modules for control function or directly to a PLC or DCS system. Relays are available for general purpose and with intrinsically safe outputs for hazardous areas.

B/W Floats are available in a variety of materials for use in many different process liquids.

7014 Unifloat™ Specifications
Output:
Type C or Type I Reed switch (Type I for direct connection to PLC or DCS)
Material of Construction:
316SS (Brass optional)
Number of switch points:
Up to 12
Maximum Length of guide tube:
Up to 12 feet
Operating Temperature:
0 to 250 degrees F
Operating Pressure:
Vacuum to 14,7 psi

7010 Tilt Switch Specifications
Output:
Mercury switch or mechanical S.P.D.T.
Material of Construction:
Polypropylene
Number of switch points:
One
Maximum Length of tether cord:
20 feet standard (longer length available)
Operating Temperature:
32 to 160 degrees F
Operating Pressure:
Vacuum to 26 psi