New Products
Specials
Technical Data
My Catalogue
Quality System
Turnaround Times
Request Quote
Seminars
Career Opportunities
Satisfaction Survey
Alpha Controls & Instrumentation Inc.
 
You are not logged in. Click here to login.
(800) 567-8686
Home
Products
Calibration Services
Product Search
Line Card
Trade Shows
Contact Us
Quote Cart
My Orders
Shopping Cart
Login
Français

ABOUT SSL CERTIFICATES
Products»Fluke»Clamp Meters»Commercial Electricians
 
True-rms 2000 A Clamp Meters (353/355)
Manufacturer: Fluke
 
Starting at: $762.00 (USD)
Stock Status: 2 to 3 weeks

Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters; the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.



Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.


Features


  • Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc

  • The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors

  • CAT IV 600 V, CAT III 1000 V rating for added user protection

  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability

  • High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool (355 only)

  • Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. (355 only)

  • Accurately measure frequency up to 1 kHz for optimum troubleshooting

  • Quickly analyze readings using the MIN, MAX, and AVG functions

  • A large backlit display allows for easy visibility in low-lit areas

  • Use the display hold feature to capture readings even when the display cannot be viewed

  • Use the low-pass filter to smooth out noisy loads and stabilize readings

    •  
    True-rms 2000 A Clamp Meters
     
    Electrical specifications
    Current measurement dc and ac 10 Hz to 100 Hz
    Range : 40 A Resolution: 10 mA
    Accuracy, A: 1.5 % rdg + 15 digits
    Trigger Level for Inrush: 0.50 A
    Trigger Level for Hz Filter OFF: 2.50 A
    Trigger Level for Hz Filter ON: 0.50 A
    Range : 400 A Resolution: 100 mA
    Accuracy, A: 1.5 % rdg + 5 digits
    Trigger Level for Inrush: 5.0 A
    Trigger Level for Hz Filter OFF: 2.5 A
    Trigger Level for Hz Filter ON: 2.5 A
    Range : 2000 A; 1400 ac rms Resolution: 1 A
    Accuracy, A: 1.5 % rdg + 5 digits
    Trigger Level for Inrush: 5 A
    Trigger Level for Hz Filter OFF: 8 A
    Trigger Level for Hz Filter ON: 8 A
    Crest Factor (50/60 Hz)
    Range : 40 A Crest Factor* : 2 @ 33 A, 2.4 @ 27 A
    Range : 400 A Crest Factor* : 2 @ 330 A, 2.4 @ 270 A
    Range : 2000 A; 1400 ac rms Crest Factor* : 2 @ 1000 A, 2.4 @ 833 A
    Current measurement ac 100.1 Hz to 1 kHz
    Range : 40 A Resolution: 10 mA
    Accuracy > 10 A : 3.5 % rdg + 15 digits
    Trigger Level for Inrush: 0.50 A
    Trigger Level for Hz Filter OFF : 2.50 A
    Trigger Level for Hz Filter ON : 0.50 A
    Range : 400 A Resolution: 100 mA
    Accuracy > 10 A : 3.5 % rdg + 5 digits
    Trigger Level for Inrush: 5.0 A
    Trigger Level for Hz Filter OFF : 2.5 A
    Trigger Level for Hz Filter ON : 2.5 A
    Range : 2000 A; 1400 ac rms Resolution: 1 A
    Accuracy > 10 A : 3.5 % rdg + 5 digits
    Trigger Level for Inrush: 5 A
    Trigger Level for Hz Filter OFF : 8 A
    Trigger Level for Hz Filter ON : 8 A
    Voltage measurement (355 only) dc and ac 10 Hz to 100 Hz
    (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.)
    Range : 4 V Resolution: 1 mV
    Accuracy: 1 % rdg + 10 digits
    Trigger Level for Hz Filter OFF: 0.050 V
    Trigger Level for Hz Filter ON: 0.050 V
    Range : 40 V Resolution: 10 mV
    Accuracy: 1 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 0.25 V
    Trigger Level for Hz Filter ON: 0.25 V
    Range : 400 V Resolution: 100 mV
    Accuracy: 1 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 6 V
    Trigger Level for Hz Filter ON: 6 V
    Range : 600 V ac rms Resolution: 1 V
    Accuracy: 1 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 6 V
    Trigger Level for Hz Filter ON: 6 V
    Range : 1000 V dc Resolution: 1 V
    Accuracy: 1 % rdg + 5 digits
    Voltage measurement (355 only) ac 100.1 Hz to 1 kHz
    (600 V and 1000 V ranges have 10 % over range to 660 V and 1100 V respectively.)
    Range: 4 V Resolution: 1 mV
    Accuracy: 3 % rdg + 10 digits
    Trigger Level for Hz Filter OFF: 0.050 V
    Trigger Level for Hz Filter ON: 0.050 V
    Range: 40 V Resolution: 10 mV
    Accuracy: 3 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 0.25 V
    Trigger Level for Hz Filter ON: 0.25 V
    Range: 400 V Resolution: 100 mV
    Accuracy: 3 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 6 V
    Trigger Level for Hz Filter ON: 6 V
    Range: 600 V ac rms Resolution: 1 V
    Accuracy: 3 % rdg + 5 digits
    Trigger Level for Hz Filter OFF: 6 V
    Trigger Level for Hz Filter ON: 6 V
    Ohms measurement (355 only)
    Range: 400 Ω Resolution: 0.1 Ω
    Accuracy: 1.5 % + 5 digits
    Range: 4 kΩ Resolution: 1 Ω
    Accuracy: 1.5 % + 5 digits
    Range: 40 kΩ Resolution: 10 Ω
    Accuracy: 1.5 % + 5 digits
    Range: 400 kΩ Resolution: 100 Ω
    Accuracy: 1.5 % + 5 digits
    Continuity beeper (355 only)
    On at ≤ 30 Ω
    Off at ≥ 100 Ω
    Frequency measurement
    Measurement range 5.0 Hz to 1 kHz
    Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
    Accuracy – 5.0 Hz to 100 Hz 0.2 % + 2 counts
    Accuracy – 100.1 Hz to 1 kHz 0.5 % + 5 counts
    Trigger level Refer to current and voltage tables

    *Add 2 % to error spec for CF > 2

    General specifications
    Batteries
    Six 1.5 V AA NEDA 15 A or IEC LR6
    Battery life (with typical usage, backlight off)
    100 hours
    Test leads
    Rated to 1000 V
    Weight
    .814 kg (1.8 lb)
    Jaw size
    58 mm (2.28 in)
    Dimensions (LxWxD)
    300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
    Safety rating
    IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III

    Environmental specifications
    Operating temperature
    32 °F to + 122 °F (0 °C to +50 °C)
    Storage temperature
    -4 °F to 140 °F (-20 °C to +60 °C)
    Operating humidity
    0 to 95 % (non-condensing)
    Operating altitude
    2000 m
    Storage altitude
    10,000 m
    IP rating
    42 (indoor use only)
    Drop test requirements
    1 m
    EMI, RFI, EMC
    FCC part 15, IEC/EN 61326-1:1997 class B, IEC/EN 61326:1997 3V/m, performance criteria B, EN61325
    Temperature coefficients
    Current: 0.1 % of reading per °C outside 22 °C to 24 °C
    Voltage: 0.1 % of reading per °C outside 22 °C to 24 °C

     

     

     Resources
    PDF File – Requires Adobe Reader User's Manual
     Product Details
     Part Number: View part numbers
     Your browsing history
     True-rms 2000 A Clamp Meters
     Oxygen Sampling System
     Five-Channel Pressure/Temperature/RH Data Logger
     Portable Sampling System
     Teflon® Lined Visual Flow Indicator for Aggresive Products
    Copyright © 2012 Alpha Controls & Instrumentation Inc..  All rights reserved.