The Motor101 measures and records on and off status changes for motors or other equipment drawing up to 200 Amps. The state change occurs when the current switch exceeds the 150mA set point. This allows for most basic equipment to be monitored.
The current switch monitors whether there is current passing through a wire around which it is clamped. When the current exceeds 150mAs, the output changes and provides a voltage for the Motor101 to measure.
The Motor101-C includes the data logger, current switch and IFC200 interface cable.
||1 second (reading rate dependent)
||0.15 to 200Amps
||0.15A (150mA) fixed (200mA AC for 50Hz operation)
||N.O.1.0A at 30VAC/DC
||1 second up to 12 hours
||1 year typical at 25°C
||1.4" x 2.5" x 0.6" (36mm x 64mm x 16mm)
||-15 to +40°C, 10 to 90%RH non-condensing
|Required Interface Package