MadgeTechs Ultra Low Temperature Freezer Validation System can measure and log data as low as -86°C. It can be placed in small and large freezers of varying configurations. The system provides a complete stand-alone temperature mapping and validation solution for freezers to ensure uniform storage and testing conditions. The ULT90 includes a USB docking station with 6 feet of cable (IFC300), 15 Cryo-Temp data loggers, and MadgeTechs FDA 21 CFR Part 11 Secure Software and IQ/OQ/PQ validation protocols. For larger freezers, loggers can be plotted in one graph to show variances in different parts of the freezer. Finally, as failure to monitor external freezer temperatures may invalidate internal freezer temperatures, an additional Cryo-Temp can be included for placement outside of the freezer.
Includes 15 Cryo-Temp data loggers with N.I.S.T. traceable calibration certificates, IFC300 docking station, MadgeTech's FDA 21 CFR Part 11 Secure Software and IQ/OQ/PQ validation protocols.
Please note, the ULT90-15 is not compatible with 64 bit operating systems.
||-86 to +35°C (-122.8 to +95°F)
|Temperature Calibrated Accuracy
||5 seconds up to 30 minutes
||2 years typical at 25°C, 1 min. reading intervals
2 years typical at 25°C, 1 min. reading intervals
||3.3" x 2.1" x 0.4", (83mm x 54mm x 11mm)
||-86°C to +35°C (-122.8 to +95°F), 0 to 95%RH
|Required Interface Package