Product Description
The RFpHTemp101A is a pH and temperature (RTD) data recorder with built-in, wireless (RF) transmitter. Using the RFC101A receiver, the RFTemp101A can transmit data up to 120 feet, line of sight. Built-in memory also stores data internally. Accepts industry standard pH and ORB probes with female BNC connectors. Temperature compensation provided through external RTD temperature channel. Measures full range from 0 to 14pH. (pH probe and RTD temperature probes are not included and must be purchased seperately).
Note: Approved for use in the US and Canada only.
Specifications
Temperature
| Remote Channel Temperature Sensor |
2, 3 or 4 wire 100 Ohm Platinum RTD |
| Remote Channel Temperature Range |
-40~+125°C |
| Remote Channel Temperature Resolution |
0.01°C |
| Remote Channel Temperature Calibrated Accuracy |
±0.1°C at 25°C |
pH
| pH Range |
0~14pH |
| pH Resolution |
0.01pH |
| pH Accuracy |
±0.1pH |
Wireless
| RF Carrier Frequency |
418 ±0.075MHz |
| RF Baud Rate |
4800 |
| Output Power |
<0dBm typical (<1mW) |
| Receiver Sensitivity (RFC101A) |
-90dBm typical |
| Typical outdoors Line of sight |
Up to 120' (36m) |
| Typical Indoors line of sight |
Up to 40' (12m) |
General
| Memory |
13,107 readings per channel |
| Reading Rate |
30 seconds up to 12 hours |
| Baud Rate |
57,600 |
| LED Indicators |
Red & Green |
| Battery Life |
1 year |
| Material |
ABS plastic |
| Dimensions |
4.5" x 2.4" x 1.0" plus 2.0" antenna (114mm x 61mm x 26mm + 51mm antenna) |
| Operating Environment |
-5~+50°C 0~95%RH non-condensing |
| Required Interface Package |
RFC101A or RFC200A |
| Approvals |
US(FCC), CA(IC) |
Part Number: 
