Nouveaux produits
Spéciaux
Donnés techniques
Mon Catalogue
Système qualité
Temps d'exécution
Soumission demandée
Séminaires
Carrieres
Sondage satisfaction
Alpha Contrôles et Instrumentation Inc.
 
Vous n’êtes pas loguer. SVP cliquez ici pour vous loguer.
(888) 621-3626
Accueil
Produits
Services d'étalonnages
Recherche
Liste des produits
Expositions
Contactez-nous
Panier à soumission
Mes commandes
Panier d'achats
Login
English

ABOUT SSL CERTIFICATES
FAIL (the browser should render some flash content, not this).
Produits»3D»Manomètres de procédés
 
Manomètre basse pression
Fabricant: 3D Instruments
 
Commençant à: $575.00 (USD)
Stock Status: 4 à 5 semaines
Accurate and reliable low pressure gauges available in 4 1/2"
Dyna-mount cases and stainless steel cases.

Benefits:

- Application flexibility, bottom or back mount in one unit
- Longer service life
- Rezero capability
- Corrosion resistance
Manomètre basse pression
 
Features:
  • Adjustable Dyna-mount fitting and flange
  • Adjustable zero setting
  • Standard changeable filter
  • All wetted surfaces stainless steel construction
  • 150% Overpressure with no effect on calibration
  • 500% Burst pressure
  • Design tested to 500,000 cycles
  • Ranges available from 0-25 inches of water (60 mbar) to 15 psig (1000 mbar)
  • Fitting size changeable in the field

Specifications
Pressure Ranges: 25 inches (60 mbar) of water to 15 psig (1000 mbar) MOD CODE LISTING
None - "psig" and "in H2O" ranges / scales
"ISZ" - "oz/in2" ranges /scales
"ISB" - "mbar" or "bar" ranges/scales
"ISO" - "kPa" ranges/scales
"ISK" - "kgf/cm2" and "mm H20" ranges/ scales

"ISZD" - Dual scale with "oz/in2" inner scale and "psig"or "in H2O" outer scale
"ISBD" - Dual scale with "mbar" inner scale and "psig"' or "in H2O" outer scale
"ISOD" - Dual scale with "kPa" inner scale and "psig" or "in H2O" outer scale
"ISKD" - Dual scale with "kgf/cm2" or "mm H2O" inner scale and "psig" / "in H2O" outer scale

"CPB" - 0 to 100% linear scale for receiver gauge
"CPA" - 0 to 10 square root scale for receiver gauge

"GCG" - Optional 1.0 % (of Span) Accuracy
"GBT" - Optional Laminated Glass Crystal (Stainless Steel Case Only)

Note: More than one Mod Code can be used at the end of the model number.
Accuracy: +/- 2.0% of full scale +/- 1.0%
Ambient Temperature: -65 deg. F to 190 deg. F (-54 deg. C too 88 deg. C)
Proof Pressure: 150% full scale no calibration shift
Burst Pressure: 500% of full scale
Operating Media: Any gas media suitable for contact with 316 stainless steel
Materials
Sensing Element: Stainless steel
Fitting: 316 stainless steel
Dial: 300 series stainless steel
Movement: Brass
Stainless Steel Case Materials
Case: 300 series stainless steel electro-polished
Crystal: Acrylic (or optional glass)
Flange: 300 series stainless steel (optional)
High Impact Plastic Case Materials
Case: High impact resistant Cycolac Plastic
Crystal: Acrylic
Flange: High impact resistant

ORDERING INFORMATION

Model Number 25584 - WW X Y Z
  • WW=PRESSURE RANGE
  • X=FITTING
  • Y=FLANGE/FITTING POSITION
  • Z=CASE
FLANGE/FITTING POSITION(Y)
1 front/bottom
2 front/back
3 back/bottom
4 back/back
5 none/bottom
6 none/back
7 detached/bottom(ABS only)
8 detached/back(ABS only)
PRESSURE RANGE(WW)
-03 0-25 inches of H2O 60 mbar
-04 0-30 inches of H2O 75 mbar
-05 0-40 inches of H2O 100 mbar
-06 0-60 inches of H2O 160 mbar
-08 0-100 inches of H2O 250 mbar
-09 0-5 psig 350 mbar
-11 0-200 inches of H2O 500 mbar
-14 0-300 inches of H2O 750 mbar
-15 0-15 psig 1000 mbar
-17 0-400 inches of H2O 1000 mbar
FITTING(X)
B 1/4 NPTM
C 1/2 NPTM
CASE(Z)
1 black ABS Plastic
4 yellow ABS Plastic
5 stainless steel


 Ressources
Fichier PDF – requiert Adobe Reader Fiche technique
 Informations
 No. de pièce: Voir no. de pièce
 L'historique de votre navigation
 Manomètre basse pression
 Trousse de vérification de pression
 Stainless Steel Test Pressure Gauges
 Manomètre de vérification
 Digital Test Gauge
Copyright © 2012 Alpha Contrôles et Instrumentation Inc..  Tous droits réservés.