Alicat Scientific's line of P Series Digital Pressure/Vacuum Gauges offer customers a variety of cost saving features.
Alicat P series pressure/vacuum gauges are:
Precise Digital pressure/vacuum display offer more resolution and are easier to read than dial type gauges.
Versatile A variety of output options from 0-5V, 0-10V and 4-20mA as well as seamless integration with other compatible flow products on one RS-232 line.
Fast Quick response speeds show users the most minimal pressure/vacuum fluctuations.
Cheap to operate Low power consumption and minimal maintenance.
Rugged Standard 302SS flow body with aluminum case housing looks good and provides long service life.
Accurate and Repeatable Accurate to 0.5% of full scale and repeatable to 0.5% of full scale.
All Alicat P series pressure gauge calibrations are NIST traceable.
Digital Pressure/Vacuum gauges are used to:
perform leak checks
verify equipment operation
check pressure/vacuum in process applications
Features
Measured Parameters
P Series Pressure/Vacuum Gauge
Pressure/Vacuum (PSIA or PSIG)
Versatility
Interfaces easily with Alicat flow products via RS-232 addressability
Tunable for application specific response
Multiple digital & analog input/output
Signal outputs include 0-5Vdc, 0-10Vdc, 4-20mA, or RS-232
Units range from -30inHg-0PSIG; 0-30PSIA; 0-1000PSIG
Add the optional battery pack and digital display for a precision calibration and/or testing device that can be used in the field.
200:1 turndown ratio allow gauge to measure 1/200th of its full scale potential
Small size. 4.1"H X 2.4"W X 1.1"D
Factory set to one of nine units of measure
Can be used for pressure, vacuum or differential pressure measurement
Remote Display for embedded applications
Pressure/Vacuum measurement in different physical locations of the system, but with the same Programmable Logic Controller (PLC).
Communication
RS-232 output of all measured parameters
0-5Vdc output of main parameter
Local Display Control
Media
Dry, non-corrosive gases.*
*Optional sensors are available for water and some mild corrosives, please contact factory with media information.
