Complete data acquisition modules for systems using personal computers and other processor-based equipment. All modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization, A/D conversion, conversion to engineering units and communicate in ASCII format via RS232 or RS485 to any host or PLC. 

The D1000 are complete single-channel data acquisition systems that are well suited to applications such as SCADA, data monitoring, data loggers, PLC’s, process controllers and instrumentation. The D1000 DAS series analog signal input types include Voltage, Current, Temperature, Flow, Bridge and Load Cell.

The D1000 series converts the digital signal data into engineering units using look-up tables. The resultant data is stored in a memory buffer. The module’s ADC continuously converts data at the rate of 8 conversions per second and stores the latest result in the buffer.

The single analog input D1000 and D2000 series provides an isolated 15-bit measurement ADC converter and discrete digital I/O bits for controlling solid state relays or sensing contact closures. The D2000 series is an enhanced version of the D1000. See data sheet for details.

The four analog input D5000 DAS modules provide direct connection to four analog signals of the same type and range. The ADC provides conversion and linearization of sensor input data and communicates in ASCII format via RS232 or RS485. 

Users of the Modbus RTU protocol should consider the 'D1000M' series. The D1000M series is similar to the D1000 series but communicates using the 'RTU' version of the Modbus protocol in RS485. The four analog input D5000M DAS modules provide direct connection to four analog signals of the same type and range to  a Modbus port or PLC. 

DIN-100 series are low cost single analog input modules that are DIN rail mountable

Input Types

Voltage Inputs: (+/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100V)   Current Inputs: (+/-1mA, +/-10mA, 4-20mA, +/-100mA, +/-1Amp)   Thermocouple Inputs: (J, K, T, E, R, S, B, C)   RTD Inputs: (.00385, .00388, .00392)   Thermistor Inputs: (2252 Ohm, Honeywell TD Series)   Bridge Inputs: (+/-30mV, +/-100mV, 1-6V)   Frequency Inputs: (100uS-30Sec, 1-20KHZ)   Accumulator Inputs: (100uS-30Seconds, 1Hz-10KHZ)