The D5000M Modbus data acquisition (DAS) uses the Modbus RTU protocol for communication. The D5000M are complete four-channel data acquisition systems that are well suited to applications such as SCADA, data monitoring, data loggers, PLC's, process controllers and instrumentation. The modules convert an analog input signal to engineering units and transmit in ASCII data format to any host or PLC with RS485 or RS232 serial ports. The D5000M Modbus DAS series analog signal input types include Voltage, Current and Temperature.
The D5000M DAS series converts the digital signal data into engineering units using look-up tables. The resultant data is stored in a memory buffer. The module's ADC continuously converts data at the rate of 8 conversions per second and stores the latest result in the buffer.
Using RS485 up to 247 Modbus DAS modules may be linked to an RS485 port or PLC. Since Modbus protocol does not support echoing, D5000M RS232 modules may not be daisy-chained. This limits you to one module per RS232 serial port.
The single analog input D5000M DAS series provides an isolated 15-bit measurement ADC and discrete digital I/O bits for controlling solid state relays or sensing contact closures.
DIN-100 Modbus series are low cost single channel modules that are DIN rail mountable.
| Input Types |
| |
|
Voltage Inputs: (+/-100mV, +/-1V, +/-5V, +/-10V, +/-100V) |
|
Current Inputs: (4-20mA) |
|
Thermocouple Inputs: (J, K, T, E Types) |
|
Thermistor Inputs: (2252 Ohm) |
|
154d
;)
