The DIN-100 Modbus data acquisition modules (DAS) are designed for systems based on the Modbus RTU protocol. The modules convert analog input signals to digital data and transmit via RS485 to a controller which may be a computer or other processor-based equipment. The DAS modules provide data acquisition from a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus percent of full scale binary values.
The DIN-100 data acquisition modules can measure temperature, load cells, bridges, voltage, current, frequency, as well as digital inputs and digital outputs.
The DIN-100 series is designed to be mounted on the industry standard DIN rail.
| Input Types |
| |
|
Voltage Inputs: (+/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100Vdc) |
|
Current Inputs: (4-20mAdc) |
|
Thermocouple Inputs: (J, K, T, E, R, S, B, C) |
|
RTD Inputs: (.00385, .00388, .00392) |
|
Thermistor Inputs: (2252 Ohm, Honeywell TD Series) |
|
Bridge Inputs: (+/-30mV, +/-100mV) |
|
Frequency Inputs: (1 Hz to 20KHz)
|
|
