The DIN-140 RTD input Modbus modules convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication. The modules provide  a wide variety of ranges and perform all signal conditioning, scaling, RTD linearization and conversion to either linearized ASCII data values or Modbus percent of full scale binary values.

	RTD Inputs: =.00385, .00392, 100  at 0 C, .00388, 100  at 25 C.
	Ranges: .00385=-200 C to +850 C.
	.00392=-200 C to +600 C.
	.00388=-100 C to +125 C.
	Resolution: 0.1 degrees C.
	Common mode rejection:100dB at 50/60Hz.
	Input connections: 2, 3, or 4 wire.
	Excitation current: 0.25mA.
	Lead resistance effect: 3 wire - 2.5 C per  of imbalance.
	4 wire - negligible.
	Max lead resistance: 50 ohms.
	Input burnout protection to 120Vac.
	Automatic linearization and lead compensation.