2867021-DRX / AC Transmitter

The 2867021-DRX is a Frequency Hopping Spread Spectrum radio designed for the professional installation and integration with other products. When installed with an approved antenna and cable, the system integrator needs to make sure that the unit's FCC label, or a copy of that FCC label, is clearly visible on the outside of the integrated product. The 2867021-DRX is approved within the 902 to 928 MHz ISM Band under Part 15 of the FCC Rules and Regulations.

2867034-DRX / DC Transmitter

The 2867034-DRX is a Frequency Hopping Spread Spectrum radio designed for the professional installation and integration with other products. When installed with an approved antenna and cable, the system integrator needs to make sure that the unit's FCC label, or a copy of that FCC label, is clearly visible on the outside of the integrated product. The 2867034-DRX is approved within the 902 to 928 MHz ISM Band under Part 15 of the FCC Rules and Regulations.

2867102-DRX / DC DIN-Rail

The 2867102-DRX is a Frequency Hopping Spread Spectrum radio designed for the professional installation and integration with other products. When installed with an approved antenna and cable, the system integrator needs to make sure that the unit's FCC label, or a copy of that FCC label, is clearly visible on the outside of the integrated product. The 2867102-DRX is approved within the 902 to 928 MHz ISM Band under Part 15 of the FCC Rules and Regulations.

Two-Way (Multipoint to point) Monitoring and Control

The AMETEK Drexelbrook 5605715-X-DRX is an integrated radio with I/O module designed for bi-directional interfacing of 4- 20mA and discrete signals in harsh industrial environments. The unique design allows the user to add on multiple channels of I/O to the transceivers in virtually endless combinations. The frequency hopping spread spectrum (FHSS) technology utilizes the 902-928MHz ISM band to guarantee a license free, interference free link between remote devices and the control room. The design is ideal for moving numerous signals within high interference environments without costly cable and conduit runs.

The Transceiver and I/O modules are delivered preprogrammed from the factory. There is no complicated field programming required. Simply connect power and signal wires and you are up and running.

I/O expansion modules connect directly to the transceiver into a 5 pin bus connection. The bus connection provides power to the modules and communication to the transceiver. Up to eight I/O expansion modules can be connected to one transceiver. All modules are designed for DIN rail mounting.