Nouveaux produits
Spéciaux
Donnés techniques
Mon Catalogue
Système qualité
Temps d'exécution
Soumission demandée
Séminaires
Carrieres
Sondage satisfaction
Alpha Contrôles et Instrumentation Inc.
 
Vous n’êtes pas loguer. SVP cliquez ici pour vous loguer.
(888) 621-3626
Accueil
Produits
Services d'étalonnages
Recherche
Liste des produits
Expositions
Contactez-nous
Panier à soumission
Mes commandes
Panier d'achats
Login
English

ABOUT SSL CERTIFICATES
FAIL (the browser should render some flash content, not this).
Produits»Fluke»Process Calibration Tools»Pressure Calibrators
 
30G and 100G Pressure Calibrator (Model 718)
Fabricant: Fluke
 
Commençant à: $2,423.00 (USD)
Stock Status: 2 à 3 semaines
Fluke’s 1 kilogram answer to pressure calibration

Of course size matters -and so does weight. Particularly if you have to carry your test tools around with you.

The Fluke 718 pressure calibrators are about a third of the size of comparable instruments and weigh just one kilogram.

With its built-in pressure/vacuum pump, the Fluke 718 offers a complete solution for on-site pressure maintenance and calibration.

Out in the field, you’ll really notice the difference.
30G and 100G Pressure Calibrator
 
Measurement Accuracy
Pressure
Fluke 718 30G
Range: -850 mbar to 2 bar (internal sensor) Over Pressure 3xFS
Resolution: 0.1 mbar
Accuracy: 0.05% full scale
Functions: Zero, Min, Max, Hold, Damp
Note: for use with non-corrosive gasses
Fluke 718 100G
Range: -850 mbar to 7 bar (internal sensor) Over Pressure 3xFS
Resolution: 1 mbar
Accuracy: 0.05% of full scale
Functions: Zero, Min, Max, Hold, Damp
Note: for use with non-corrosive gasses
Fluke 718 series
via pressure module connector
Range: 29 pressure modules, 2,5 mbar to 700 bar
Over pressure per pressure module specs
Resolution: Per pressure module specs
Accuracy: To 0.025% of full span, per pressure module specs
Functions: Zero, Min, Max, Hold, Damp
Note: media compatibility per pressure module specs,
Source Pressure, built in pump
Range: -820 mbar to full scale
Supported Pressure Units; psi, in. H20
(4 °C), in. H20 (20 °C), cm H20 (4 °C),
cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm

Technical Data
Loop Power
Range: 24 V dc
Accuracy: +/- 10%
Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V
Measure Accuracy:
Range: 0 to 24 mA
Resolution: 0.001 mA
Accuracy: 0.025% + 1 count
Display
LCD, 5 digit pressure and current simultaneous

Environmental Specifications
Operating temperature
-10ºC to 55ºC
Storage temperature
-40ºC to 60ºC
Humidity (Without Condensation)
95% (10ºC to 30ºC)
75% (30ºC to 40ºC)
45% (40ºC to 50ºC)
35% (50ºC to 55ºC)
Operating Altitude
3,000m max

Safety Specifications
Safety
CSA C22.2 No. 1010.1:1992
Maximum voltage
30V

Mechanical & General Specifications
Size
210 mm L x 87 mm W x 62 mm
216 mm L x 94 mm W x 67 mm (with holster)
Weight
Approx. 737g
Approx. 992g (with holster)
Warranty
3 years
Shock & Vibration
Random, 2G, 5-500 Hz
1m drop test
Battery type
Two 9V batteries, ANSI/NEDA 1604A or IEC 6LR61
Battery life: 4 to 20 hours, typical, depending on functions

 Ressources
Fichier PDF – requiert Adobe Reader User Manual
Fichier PDF – requiert Adobe Reader Supplement User Manual
 Informations
 No. de pièce: Voir no. de pièce
 L'historique de votre navigation
 30G and 100G Pressure Calibrator
 Precision Multifunction Process Calibrator
 Intrinsically Safe Multi-function Process Calibrator
 Documenting Process Controllers
 Calibrateur de procédé mutifonction Fluke
Copyright © 2012 Alpha Contrôles et Instrumentation Inc..  Tous droits réservés.