Product Description
The RFPulse101A is pulse counter and totalizer data recorder with built-in, wireless (RF) transmitter. Using the RFC101A receiver, the RFTemp101A can transmit data up to 120 feet, line of sight. Built-in memory also stores data internally. Can be used with dry contact switches and relays or analog voltage input signals from external devices (i.e. pulse initiators, pulse output transducers, totalizers, counters, flow meters etc.). Features user-programmable Engineering Units and fast data sampling rate.
Note: Approved for use in the US and Canada only.
Specifications
Pulse
| Maximum Pulse Rate |
100 Hz |
| Pulse Input Range |
0~12V continuous (0~30V peak) |
| Pulse Input Low |
<0.4V |
| Pulse Input Hight |
>2.7V |
| Pulse Internal Weak Pull-up |
<500ìA |
| Minimum Input Active |
4 milliseconds |
| Input Impedance |
>1k |
Wireless
| RF Carrier Frequency |
418 ±0.075MHz |
| RF Baud Rate |
4,800 |
| Receiver Sensitivity (RFC101A) |
-90dBm typical |
| Typical outdoors Line of sight |
Up to 120' (36m) |
| Typical Indoors line of sight |
Up to 40' (12m) |
General
| Memory |
4,095 |
| Reading Rate |
30 seconds up to 12 hours |
| Battery Life |
15 minutes up to 5 years |
| Material |
ABS plastic |
| Dimensions |
2.7" x 1.6" x 0.8", with 2.0" whip antenna (68mm x 41mm x 20mm, 51mm whip antenna) |
| Operating Environment |
-30 to 70°C, 0 to 95%RH non-condensing |
| Required Interface Package |
RFC101A or RFC200A |
| Approvals |
US(FCC), CA(IC) |
No. de pièce: 
