Radio et module E/S intégré/Appareils industriel avec E/S sans fils/Phoenix Contact

Vous n’êtes pas loguer. SVP cliquez ici pour vous loguer.

ABOUT SSL CERTIFICATES

Produits

Phoenix Contact

Appareils industriel avec E/S sans fils

Radio et module E/S intégré (RAD-ISM-900-SET-BD-BUS)

Fabricant: Phoenix Contact

The Problem: Running cables and conduit to sensors, switches, meters, temperature gauges, pumps, etc. costs money and is difficult or sometimes impossible. Without a link to remote equipment, you have to either run out to check the devices or wait for trouble to start!

The OMNEX Solution: Gives you ability to wire remote devices to a terminal block in the field, and have the signal reliably appear at a terminal block where you need it. No cables or conduit - secure and robust!

One Way Monitoring and Control Solutions

The RAD-ISM-900 series of Trusted Wireless seamlessly bridge the costly communications gap between sensors, switches, alarms and PLCs. Effectively relay signals over great distances and through high interference with these HopLink radios.

Two Way Monitoring & Control Solutions

The RAD-ISM-900-BD-BUS series of DIN rail mount remote I/O Trusted Wireless enable users to move multiple points of discrete and analog updates back and forth between two locations. Flexibility is offered by allowing the user to "stack" different combinations of I/O on the paired RF modules depending on site requirements.

The RAD-ISM-900-SET-BD-BUS is an integrated radio & I/O module designed for bi-directional interfacing of a 4-20mA current loop and two digital signals in harsh industrial environments. This unique design also allows the user the flexibility to add on multiple channels of I/O to the paired transceivers in combinations. The Frequency Hopping Spread Spectrum (FHSS) utilizes 902-928MHz ISM band to guarantee a license free, interference free link between remote devices and the control room. The design is ideal for moving numerous signals within high interference environments without costly cable and conduit runs.

Wiring Diagrams

Wiring diagrams are available for the following products. Please click on the appropriate link to view the selected diagram.

RAD-ISM-900-SET-UD Series (formerly HS-900 series)

RAD-ISM-900-SET-UD (2 wire)
RAD-ISM-900-SET-UD (3 wire)
RAD-ISM-900-SET-UD (4 wire)

RAD ISM-900-SET-AC-UD (2 wire)
RAD ISM-900-SET-AC-UD (3 wire)
RAD ISM-900-SET-AC-UD (4 wire)

RAD ISM-900-SET-DC-UD (2 wire)
RAD ISM-900-SET-DC-UD (3 wire)
RAD ISM-900-SET-DC-UD (4 wire)

RAD-ISM-900-SET-BD-BUS Series (formerly DS-900 series)

RAD-ISM-900-SET-BD-BUS (input wiring)
RAD-ISM-900-SET-BD-BUS (output wiring)