The Problem: Running cables and conduit to sensors, switches, meters, temperature gauges, pumps, etc. costs money and is difficult or sometimes impossible. Without a link to remote equipment, you have to either run out to check the devices or wait for trouble to start!
The OMNEX Solution: Gives you ability to wire remote devices to a terminal block in the field, and have the signal reliably appear at a terminal block where you need it. No cables or conduit - secure and robust!
One Way Monitoring and Control Solutions
The RAD-ISM-900 series of Trusted Wireless seamlessly bridge the costly communications gap between sensors, switches, alarms and PLCs. Effectively relay signals over great distances and through high interference with these HopLink radios.
Two Way Monitoring & Control Solutions
The RAD-ISM-900-BD-BUS series of DIN rail mount remote I/O Trusted Wireless enable users to move multiple points of discrete and analog updates back and forth between two locations. Flexibility is offered by allowing the user to "stack" different combinations of I/O on the paired RF modules depending on site requirements.
An exciting new product line is now available from Phoenix Contact: Trusted Wireless I/O Interface.
Transmit analog and digital signals from control to remote devices with Phoenix Contact wireless interface modules.
Now you can monitor and control level, flow, pressure, temperature, alarms, etc; while eliminating costs for cable, conduit, trenching and boring.
One way for monitoring, two-way for control with expandable I/O. Up to 34 analog or 68 digital signals.
Reliable transmission up to 300m – no line of sight. Max. transmission distance: 32 km
Frequency Hopping Spread Spectrum tolerates high-interference environments. No FCC license needed.
Compact, robust packaging. No programming required.
Class I, Division 2 approved for hazardous area installations (UL, CUL and CSA approved) Save time, materials and money that would be spent on cables, conduits and labour!! Please find below the ordering information.
Part #
Part Description
Function
5603378
MCR-RT-I/O-PLUS-ANT
Transceiver Set Including Antenna's
5603803
MCR-RT-I/O-PLUS
Transceiver Set, No Ant.
5603380
MCR-RT-SPLIT/SIMPLEX
Transmitter, Dual Receiver
5603379
MCR-RT-I/O-REPEATER
Transceiver
5603121
MCR-RAD-DIN SYSTEM
Transmitter/Receiver Set with Antenna
5603385
MCR-RT-HOPKEY
Hopkey, Repeater
5651956
MCR-RAD-R-DIN
Phoenix MCR-R-DIN
5603383
MCR-RT-8DI
8 Digital Input, spare receiver
5603384
MCR-RT-8DO-REL
8 Digital Output, Relay
5603381
MCR-RT-4AI-DC
4 channel 4-20mA Input
5603382
MCR-RT-4AO-DC
4 channel 4-20mA Output
5651961
4-WAY RF SPLITTER MCX
4-way RF Splitter, MCX(F)- MCX(F)
5603119
MCR-RAD-AC SYSTEM
AC Radio System
5603120
MCR-RAD-DC SYSTEM
Sensor Radio System
Datasheets:
Click on the image above to view the Datasheet for the MCR-RAD.
(pdf, 234K).
Click on the image to view the Installation Instructions for the MCR-RAD
(pdf, 2,522K).
Click on the image to view the Wireless Interface MCR-RT-I/O-PLUS... Two-way (Point-to-Point) Monitoring and Control with Expandable I/O Options User Manual
;)
