These NEMA 4X enclosures provide a high degree of protection against the harsh operating environment of an industrial plant. The Precision Digital meters are mounted inside the enclosure for maximum protection. The clear cover is held in place with four screws.

DIMENSIONS

 

1. Prior to drilling the hole for the conduit, align the display for best viewing through clear cover as shown.
2. Position the meter(s) such that the nonviewable area does not obstruct the displays.
3. Prior to drilling the hole for the conduit, consider the following: The dual meter configuration may be used for a single meter in the event that an additional meter is installed in the future. This will eliminate the need to re-position.
   
   

1. Type A (e.g. PD690) meter bezel dimensions: 4.25 x 2.3 x 0.6 (108 x 59 x 15), depth behind panel: 4.7 (119) not including clearance for wiring.
2. Type B (e.g. PD680) meter bezel dimensions: 3.82 x 1.88 x 0.21 (97 x 48 x 5), depth behind panel: 5.1 (130) not including clearance for wiring.
3. Type C (e.g. PD765) meter bezel dimensions: 4.68 x 2.45 x 0.6 (119 x 62 x 15), depth behind panel: 3.6 (91) not including clearance for wiring.
4. Type D (e.g. PD158) meter bezel dimensions: 2.45 x 4.68 x 0.6 (62x 119 x 15), depth behind panel: 3.6 (91) not including clearance for wiring.
5. Type E (e.g. PD6000) meter bezel dimensions: 4.68 x 2.45 x 0.6 (119 x 62 x 15), depth behind panel: 5.05 (128) not including clearance for wiring.
   

Notes:

1. All dimensions are in inches and millimeters (mm), weight is in pounds and (kg)
2. Enclosure material: Thermoplastic with clear polycarbonate cover
3. Enclosure rating: UL, CSA, NEMA 4X
4. Pipe mounting kit available for PDA2407 & PDA2408, see page 150 for details.