• Program or Read Meter Settings


• Save Meter Profiles for Cloning


• Configure Meter Input


• Configure Relay and Alarm Settings


• Edit Advanced and Security Settings


• Log Up To 100 Meters


• Data Saved in HTML Data Files


• Free Download

MeterView® software allows remote programming and data acquisition of the Trident series. The remote programming allows for all available meter settings to be programmed from a personal computer through an easy user-friendly interface. The data acquisition allows the user to gather readings from up to 100 meters at user-selected intervals and generate charts using common tools like Microsoft® Excel.

Configure Input
	Input type Decimal point Temp units Sensor type
Set Relays/Alarms
	Select mode Set/reset points Fail-safe operation On & off delays
Meter Scaling
	Scale input No cryptic codes Simple to use
Advanced Settings
	Password Filter & bypass Transmit delay Function type Cutoff value

Calibration Reporting Printed by MeterView 3.00 - Build 2060 Printed on 3/18/2003 3:45:28 PM PD765 Configuration - Meter #00 Input Configuration Input selected: 4 to 20 mA Decimal point: ddd.d Temperature unit: Degrees F Temperature sensor: Type J   Current Scaling (4-20 mA) Input 1: 4.00 Display 1: 0.0 Input 2: 20.00 Display 2: 200.0   Voltage Scaling (0-10 V) Input 1: 0.00 Display 1: 0.0 Input 2: 10.00 Display 2: 50.0   Relay/Alarm 1 Settings Action: Automatic Reset Fail-safe: Off Set point: 40.0 On Delay: 0 Reset point: 10.0 Off Delay: 0   Relay/Alarm 2 Settings Action: Automatic Reset Fail-safe: Off Set point: 40.0 On Delay: 0 Reset point: 10.0 Off Delay: 0   Display Response Variables Adjustment: 0.0 Filter: 10 Bypass: 0.2 Transmit delay: 0   Miscellaneous Password: _ _ _ _ Meter address: 00 Serial number: 200111201423430   Factory Calibration Constants Current gain: 0.0340963 Current offset: -0.1501465 Voltage gain: 0.0175513 Voltage offset: -1.0410160 Test gain: 0.0169000 Test offset: -0.0507000 TC Type J gain: 1.0454590 TC Type J offset: 6947.075 TC Type J CJ ref.: 34415.38 TC Type K gain: 1.0459060 TC Type K offset: 6910.510 TC Type K CJ ref.: 34463.38 TC Type T gain: 1.0452330 TC Type T offset: 6920.954 TC Type T CJ ref.: 34447.75 TC Type E gain: 1.0452550 TC Type E offset: 6951.981 TC Type E CJ ref.: 34443.00 RTD 100 Ohm PT (385) gain: 1.0422950 RTD 100 Ohm PT (385) offset: 6221.340 RTD 100 Ohm PT (392) gain: 1.0422950 RTD 100 Ohm PT (392) offset: 6221.340

DATA ACQUISITION Digital Panel Meters make a great front end to a PC-based data acquisition system. They are easy to set up, can be used for a wide range of inputs, will power the transmitter, and best of all provide a local display of the process. Precision Digital has the perfect package with its Trident Digital Panel Meters, a wide selection of serial adapters and converters and MeterView software. Data is displayed on the PC and written to a file that could then be imported into a spreadsheet or other application Sample File Generated by MeterView® Monitor One Meter (PDA7503-1) Monitor One to Ten Meters (PDA7503-2) Monitor One to One Hundred Meters (PDA7503-3)

SPECIFICATIONS System Requirements: Windows® 95/98/ME/NT4/2000/XP Communications: RS-232 adapter or RS-422/485 adapters with an RS-232 to RS-485 or USB to RS-485 converter may be used for communicating with the meters. Number of Meters: Up to 100 meters simultaneously with addressing capability; minimum scan time for 100 meters: 60 sec Meter Address: 00 to 99 Baud Rate: 300 bps to 19,200 bps; selection must match the baud rate selected in the meters. Screen Update Rate: Dependent on system and meter settings. Rates of up to 10 meters/second are attainable at 19,200 bps. Configuration: Configure meter settings one meter at a time. Configuration Report: Save configuration to PDC file format or export to HTML for printing, cloning, or restoring meter. Logging Interval: 2 seconds to 60 hours or manual Manual Logging: Data saved to file when Log button is pressed. Data Logging Report: Log data to HTML file format. All enabled meters are logged to a single file. Alarm Notification: Pop-up message indicates new alarm condition. Alarm alert notification may be disabled. Event Log: Important events are logged with date and time stamp. Relay/Alarm Status: Indicate relay/alarm status with customized color and message label. Relay status indication may be disabled. Units & Tag Number: Show engineering units and tag number information; these settings are not saved to the meter. Relay Acknowledge: Relays may be acknowledged by clicking on corresponding Relay Status button. Meters must be set up for manual reset and Relay Mode must be enabled in MeterView.