Features

• Smart Temperature Transmitters with HART^® Protocol


• Universal Input: RTD, TC, Ohm & mV Inputs


• Easy to Program with PC or HART Communicator


• Order Configured at the Factory Ready to Install


• Display Models have 330° Rotatable Backlit LCD


• Display PV, Input Type, Eng Units & Bargraph


• Enhanced Display Model PD312 with Pt100 RTD


• Low-Cost Model PD301, PC Programmable


• 2-Wire Scalable 4-20 mA Output


• Galvanic Isolation Prevents Ground Loops


• Wide Voltage Range: 10.5 to 45 VDC


• Operating Temperature: -40 to 75°C


• Automatic Cold Junction Compensation for TC Inputs


• Protection Heads & Thermowells Available


• FM, CSA, ATEX, IECEx Explosion-Proof Enclosures

INTRODUCTION

The ExSense T Series is a line of smart temperature transmitters that include some models with HART® communication capability. All even numbered models can be configured using a HART modem and a PC running the free HART software provided, or they can be configured in the field using a handheld HART communicator. The other models can be configured using a USB modem and a PC running the free software provided. All enclosed models can be ordered with an integral Pt100 RTD, J, K, T thermocouples; see the Ordering Information for model numbers.

PD301 - PD306 Head Mount Models

The non-display head-mount (hockey-puck) models can be mounted inside a DIN Form B connection head. We offer the transmitter without an enclosure (models PD301 & PD302), mounted in a connection head (models PD303 & PD304), and mounted in a connection head with attached temperature probe (models PD305 & PD306). These low-cost models are PC programmable, and share the same input types and other features of the remaining ExSense T Series. The even numbered models (PD302, PD304, and PD306) include HART communication capability. Models with the aluminum connection head are available with safe area (NEMA 4X, IP66 rated), or Certified explosion-proof housings.  Connection heads are available in aluminum and stainless steel, and with 1/2", 3/4", or M20X1.5 conduit holes, and 1/2" or 3/4" NPT process opening (for probe, thermowell, or adaptor fitting).

PROGRAMMING

PD301 - PD306 PC Programming

PD302 HART Programming

 

PC Programming Software

	The Current Setup window is used to trim the analog output to match the device reading the current. Click on Read and type the values in the boxes. Click on Update to upload the new values to the transmitter. Test your loop by selecting a Fix Loop value and clicking Send.
The Parameter Setup window is used to set up the input type, range for the 4-20 mA, temp units, and other settings related to the sensor and analog output. You can also select to display PV, mA, or %.
	The HART Information window allows you to program or read the transmitter information and to modify the HART address.
The Graph Monitor window is used to monitor the PV, mA, and %. You can also monitor just one of the variables. A log data file can be saved for later viewing; it contains the time, data value, and units. The screen update rate is selectable between 2 sec and 30 min.

CONNECTIONS

PD301 - PD306

DIMENSIONS

PD301 & PD302

ACCESSORIES TC & RTD Protection Heads • Exp-Proof Certified & General Purpose • Aluminum & Stainless Steel • NEMA 4X, IP66 Rated • Stainless Steel Ball Chain RTD Probes & Thermowells RTD probes are offered in 6", 9", and 12" lengths and ¼" diameter; other sizes are available upon request. Spring-loaded probes and thermowells are special order; please consult the factory for details.

ACCURACY & RANGES Input Type Input Range Accuracy (% of Span) Min Output Span (4-20 mA) RTD Pt100 -200 to 850°C (-328 to 1562°F) ±0.2°C or 0.08% 10°C (18°F) Pt500 -200 to 250°C (-328 to 482°F) ±0.5°C or 0.20% 10°C (18°F) Pt1000 -200 to 250°C (-328 to 482°F) ±0.3°C or 0.12% 10°C (18°F) Cu50 -50 to 150°C (-58 to 302°F) ±0.2°C or 0.08% 10°C (18°F) Cu100 -50 to 150°C (-58 to 302°F) ±0.3°0C or 0.12% 10°C (18°F) Ni100 -60 to 180°C (-76 to 356°F) ±0.2°C or 0.08% 10°C (18°F) Ni500 -60 to 180°C (-76 to 356°F) ±0.5°C or 0.20% 10°C (18°F) Ni1000 -60 to 150°C (-76 to 302°F) ±0.3°C or 0.12% 10°C (18°F) Potentiometer Resistance 0 to 400 Ω ±0.1 Ω or 0.08% 10 Ω 0 to 2,000 Ω ±1.5 Ω or 0.12% 100 Ω TC B 0 to 1820°C ( 32 to 3308°F) ±2.0°C or 0.08% 500°C (900°F) E -270 to 1000°C (-454 to 1832°F) ±0.5°C or 0.08% 50°C (90°F) J -210 to 1200°C (-346 to 2192°F) ±0.5°C or 0.08% 50°C (90°F) K -270 to 1372°C (-454 to 2501°F) ±0.5°C or 0.08% 50°C (90°F) N -270 to 1300°C (-454 to 2372°F) ±1.0°C or 0.08% 50°C (90°F) R -50 to 1768°C ( -58 to 3214.4°F) ±2.0°C or 0.08% 500°C (900°F) S -50 to 1768°C ( -58 to 3214.4°F) ±2.0°C or 0.08% 500°C (900°F) T -270 to 400°C (-454 to 752°F) ±0.5°C or 0.08% 50°C (90°F) C 0 to 2320°C (32 to 4208°F) ±0.5°C or 0.08% 50°C (90°F) D 0 to 2320°C (32 to 4208°F) ±0.5°C or 0.08% 50°C (90°F) Voltage mV -10 to 75 mV ±20μV or 0.08% 5 mV -100 to 100 mV ±20μV or 0.08% 5 mV -100 to 500 mV ±30μV or 0.08% 6 mV -100 to 2000 mV ±50μV or 0.08% 20 mV SPECIFICATIONS General Input: Universal RTD, TC, Resistance, or Voltage Output: Two-wire 4-20 mA scalable Accuracy: ±0.08% of span typical, see table for details Temperature Drift: RTD: ±0.004°C/°C. TC: ±0.03°C/°C Underrange: 3.8 mA Overrange: 20.8 mA Sensor Break: Selectable ≤3.6 mA Low Alarm or ≥22 mA High Alarm Response Time: 1 second Long Term Stability: Better than 0.05% per year Start Up Time: Less than 5 seconds Noise Filter: Programmable 0 to 85 μA Damping Time: Programmable 0 to 30 sec Output Resolution: 0.3 μA Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years Relative Humidity: 0 to 90%, condensation allowed Isolation: 2 kV input-to-output Shock & Vibration Resistance: 4g/2 to 150 Hz as per IEC 60 068-26 EMC: Immunity & emission interference according to GB/T17626.2-1998), compliance with IEC 61000-4-3:1995 Warranty: 1 year parts & labor PD301 & PD302 Head Mount Smart Transmitter Programming Method:    PD301: PDA8301 USB modem and PC software    PD302: PDA8301 USB or PDA8302 HART modem and PC software or field handheld HART communicator Power Supply: 7.5 to 45 VDC, reverse polarity protected Load Impedance: 790 Ω @ 24 VDC max or ((V supply - 7.5 V)/0.0208 A) Ω Operating Temperature: -40 to 85°C Storage Temperature: -40 to 100°C Connections: Screw terminals accept 12 to 22 AWG Enclosure: Polycarbonate housing with epoxy potting, NEMA 1, IP00 (NEMA 4X, IP66 with PDA1080WM) Weight: 1.18 oz (33.5 g) Overall Dimensions: Dia. 1.73" x 0.89" (44 mm x 22.5 mm) Installation Angle: No limit Installation Area: Connection head according to DIN 43 729 Form B