Transmetteur de pression différentielle "mouillé" (Model 230)
Fabricant: Setra
This wet to wet differential pressure transducer provides a high output without compromising your budget. Unlike fluid filled sensors that can rupture, the Model C230's wetted parts are all stainless steel. Unidirectional and bi-directional ranges are available from ±1 to 100 psid.
Applications
Energy Management Systems
Pump Speed Control
Filter Condition Monitoring
Process Control
Refrigeration Equipment
HVAC
Model 230 Specifications
Electrical Output Voltage
0 to 5 VDC 0 to 10 VDC
Electrical Output Current
4 to 20 mA
Accuracy (RSS Method)
±0.25% Full Scale
Type of Pressure
Differential (can be wet both sides)
Pressure Ranges
Unidirectional:
0 to 1, 2, 5, 10, 25, 50, 100 psid
Bi-directional:
0 to ±0.5, ±1, ±2.5, ±5, ±10, ±25, ±50 psid
Thermal Effects
Thermal Compensation °F (°C):
30 to 150 (-1 to 65)
%FS/100°F(100°C)max.zero:
±2.0 (±3.6)
%FS/100°F(100°C)max.span:
±2.0 (±3.6)
Media
Gases or liquids compatible with 300 series and 17-4PH stainless steel, and Viton® "O" ring. (Hydrogen not recommended for use with 17-4 PH stainless steel.)
*Viton® is a registered trademark of DuPont Dow Elastomers
;)
;)
No. de pièce: 
