Combine the accuracy of complex and expensive bridges with innovative features that simplify measurement processes and provide excellent value
The Fluke Calibration 1594A and 1595A Super-Thermometers combine the accuracy of complex and expensive bridges with innovative features that simplify measurement processes and provide excellent value. They are accurate enough for the primary lab and economical enough for the secondary lab. With temperature-controlled internal reference resistors, six input channels, a large graphical display, and a multitude of temperature-specific measurement functions, PRT, thermistor and SPRT calibration (0 Ω - 500 kΩ) has never been so easy and economical. And with the built-in Ratio Self-Calibration function, you can verify or calibrate the Super-Thermometer’s ratio accuracy in-house with the press of a button—no other single thermometry bridge can do so much, so well!
• Calibrate SPRTs, PRTs, RTDs and thermistors (0 Ω - 500 kΩ)
• Accuracy as good as 0.06 ppm (0.000015°C)
• “Ratio Self-Calibration” verifies and calibrates resistance ratio accuracy
• Automatic zero-power measurements calculate thermometer probe self-heating
• Temperature-controlled internal reference resistors
• Calibrated sensing current lowers overall instrument uncertainty
• Four input channels on the front panel accept sensors under test or external references
• Two dedicated external reference input channels on the rear panel
• Standby current reduces transient effects when scanning between channels
• Channel Select keys turn measurement mode on or off at the touch of a button
• Sample rates as fast as one second
• USB data transfer and computer control
• Remote view and device control via Ethernet
• Compatible with MET/TEMP II automated calibration software and LogWare II multichannel, real-time data acquisition software
• Includes NVLAP-accredited certificate of calibration, User’s guide, Technical guide (English only on CD-ROM), RS-232 to USB converter cable, and regional power cord
Measurement Capability | 4-wire PRT, Thermistor, Resistance, Resistance Ratio |
Input Resistance Range | 0 - 500 kΩ |
Ratio Range | 0 - 10 |
Accepted External RS Range | 1 Ω - 10 kΩ |
Internal RS | 1 Ω, 10 Ω, 25 Ω, 100 Ω, and 10 kΩ |
PRT Conversion Types | ITS-90, PT-100, CVD-ABC, CVD-ALPHA, Polynomial |
Thermistor Conversion Types | R(T) Polynomial, T(R) Polynomial |
Display Units | ratio (RX / RS), K, °C, °F, Ω |
Display Resolution | 0.1 - 0.000001 |
Sample Period (Seconds)[1] | 1, 2, 5, and 10 |
Statistics | Average, Std Dev, SE of Mean, Max, Min, Difference, Peak-Peak, Delta, N |
Front Panel Channels | Four PRT/Thermistor inputs (channels 2 & 4 can be configured for either RX or RS inputs) |
Rear Panel Channels | Two dedicated reference resistor inputs (RS) |
Input Terminals | DWF Connector, Tellurium Copper |
Data Logging to Internal Memory | 80,000 individual time- and date-stamped readings (~6 MB) |
Internal Real-Time lock | Yes |
Communications | RS-232, USB, IEEE-488, Ethernet |
Display Type | Full VGA, LCD |
User Interface Languages | English, French, Spanish, German, Russian, Chinese, Japanese |
[1]Two second sample rate required for full accuracy |
Fluke Calibration 1594A / 1595A Super-Thermometers - Data Sheet 6.8 MB |
Fluke Calibration 1594A / 1595A Super-Thermometers - Manual 2.4 MB |