1AC-II / 1LAC-II Non-Contact Voltage Tester
Easy-to-use pocket-sized voltage detector that glows red and beeps when there is voltage present
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detected
• A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
• Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
• When the tip blinks red you know it’s working properly
• Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
• Wide voltage detection range allows for use in a broad range of applications
• Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
• Rated to CAT IV 1000 V for added protection
• CE and CSA approved
• Additional tool features
• Audible/Silent mode for added convenience in quiet environments
• On/Off button
• Batteries included
• 2 year warranty
The Fluke 1LAC II Non-Contact Voltage Tester is easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Simple to use, the way you want it
The 1LAC II tester lets you work the way need to in different situations:
Audible/Silent modes
On/Off button to help prolong battery life
CAT IV 1000 V for added protection
Upon detection of voltage, the tester tip glows red and beeper sounds (if activated). The 1LAC II is backed by a two-year warranty.
1AC-11
• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience
1LACII
• Non-contact voltage detection from 20 to 90 V AC
• On/off button with continuous self-test helps prolong battery life
• Fast, simple go/no-go voltage detection
| 1AC-II | |
| Operating Principle | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage |
| Voltage Sensing Ranges | Nominally 200 V AC - 1000 V AC, 45 Hz - 405 Hz; also a 20 V - 90 V control circuit model |
| Detector Tip Style | Blade or round, depending on model |
| Light Source | One high intensity red LED |
| Safety Rating | CAT IV 1000 V |
| IP Rating | IP 40 |
| Operating Temperature | -10°C - 50°C |
| Operating Humidity Ranges | 0% - 95% (0°C - 30°C) 0% - 75% (30°C - 40°C) 0% - 45% (40°C - 55°C) |
| Operating Altitude | 3000 m |
| Batteries | Two (2) AA alkaline batteries included |
| 1LAC II | |
| Specifications | |
| Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
| Voltage sensing ranges | 20 V to 90 V control circuit model |
| Detector Tip Style | Round-tip |
| Light source | One high intensity red LED |
| Agency Approvals | c CSA us, CE, C-Tick |
| Safety Rating | 1000 V, CAT IV |
| Safety Compliance | Meets IEC 61326-1:2006 |
| IP Rating | IP 40 |
| Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
| Operating Humidity Ranges | 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40 to 55°C) |
| Operating Altitude | 3000 m |
| Cleaning | Clean with damp cloth |
| Batteries | 2 AAA alkaline batteries included |
| Battery Life | Typical battery life of greater than 1 year |
| Warranty Period | Two years |
View All Part Numbers