The SharpEye 40/40C-I, a multispectrum QuadSense IR flame detector, provides long distance detection of hydrocarbon fires at up to 215 ft. (65 m), fast detection in under five seconds.
Featuring wide operation temperature range in extreme weather conditions with strengthened reliability, the 40/40C-I is based on proven Triple-IR (IR3) technology, ensuring high sensitivity with superior immunity to false alarms to keep a SharpEye on your safety!9:18 AM 2022-02-25
• Advanced long distance detection of hydrocarbon-based fuel and gas fires at up to 215 ft. (65 m)
• Fast detection, under five seconds
• Proven false alarm immunity
• Unparalled reliability - 150,000 hours MTBF
• Best in class temperature range: -40 to +185 °F (-40 to +75 °C)
• Enhanced durability backed up by with three-year warranty
• Five sensitivity levels, adapting to any application
• Smart field of view integrity test, allowing flawless operation
• Innovative IR Built-In-Test - continuously validating the optical integrity and the electronic circuitry
• Multiple output options for maximum compatibility with standard infrastructures
• Plug-and-Play - factory calibrated for immediate use in any fire detection system
• Universal wiring option for fast ordering process
• Two mode heated optics for impeccable performance in challenging environmental conditions
• Worldwide and regionally certified for hazardous areas
• Performance and reliability approved by recognable certification bodies
• SIL3 compatible
• Internal log event recorder to analyze past events
| Detection response time | Standard response: Typically < 5 sec |
| Sensitivity ranges | 5 sensitivity ranges for 1 ft2 (0.1 m2) n-heptane pan fire |
| Field of view | Horizontal: 100 ° Vertical: 95 ° |
| Temperature range | Operating: -40 °F (-40 °C) to 167 °F (75 °C) Storage: -40 °F (-40 °C) to 167 °F (75 °C) |
| Humidity | Non-condensing relative humidity up to 100% |
| Electrical Specifications | |
| Operating voltage | 24 Vdc nominal (18-32 Vdc) |
| Power consumption | Standby: Maximum 3 W (8 W with heated window) Alarm: Maximum 4.2 W (9 W with heated window) |
| Cable entries | 2 x ¾ in - NPT conduits or 2 x M25 x 1.5 mm ISO |
| Electrical input protection | According to EN 50130 |
| Electromagnetic compatibility | EMI/RFI protected to EN61000-6-3 and EN 50130 |
| Electrical interface | The detector includes 17 terminals and one wiring option |
| Outputs | |
| Relays | Alarm, fault, and auxiliary SPST volt-free contacts rated 2 A at 30 Vdc |
| Analog output | Analog port malfunction: 0 V (< 0.5 V) Normal: 2 V ± 0.3 V Alarm: 5 V ± 0.3 V |
| 0-20 mA (stepped) | Fault: 0 ± 1 mA Built-in test (BIT) fault: 2 mA ± 0.3 mA Normal: 4 mA ± 0.3 mA Warning: 16 mA ± 0.3 mA Alarm: 20 mA ± 0.3 mA |
| HART® protocol | HART communications on the 0-20 mA analog current (FSK)used for maintenance, configuration changes, and assetmanagement, available in mA source output wiring options |
| RS-485 | RS-485 Modbus® compatible communication link that can beused in computer controlled installations |
| Mechanical Specifications | |
| Enclosure options | Heavy duty copper free aluminum (less than 1%), polyurethanepainted |
| Mounting | Electropolished stainless steel 316 |
| Dimensions | Detector: 4 x 4.6 x 6.18 in (100.6 x 117 x 155 mm) |
| Weight | Detector aluminum: 2.8 lb (1.3 kg) Tilt mount: 2.5 lb (1.1 kg) |
| Water and dust | IP66 and IP68 per EN 60529, NEMA® 250 6P |
• Oil and gas onshore and offshore installations and pipelines
• Chemical and petrochemical plants
• Storage tank farms
• Aircraft hangars
• Power generation facilities
• Pharmaceutical industry
• Printing industry
• Warehouses
• Automotive industry
• Explosives and munitions
• Waste disposal facilities
• Light industrial
View All Part Numbers