435 Series II Power Quality and Energy Analyzer

Equipped w/ advanced power quality functions & energy monetization capabilities, there is no electrical issue this model can't handle

This product is no longer available. Contact us at 800-567-8686 for alternative solutions.

Have questions? We're here to help!

Call

435 Series II Power Quality and Energy Analyzer 03248

Think of the Fluke 435 II Power Quality and Energy Analyzer as your insurance policy. No matter what goes wrong in your facility, with the 435 II you will always be prepared. Equipped with advanced power quality functions and energy monetization capabilities, there is no electrical issue this model can’t handle.

Included is the BC430 Power Adapter, international plug adapter set, BP290 (single capacity Lithium-ion battery) 28 Wh (8 h or more), TLS430 test lead and alligator clip set, WC100 colour coding clips and regional decals, i430 Flex-TF 24 in (61 cm) length, 4 flexible current probes, 8 GB Fluke Connect Wireless SD card, PowerLog on CD, and USB cable A - B mini. The Basic model does not include current measuring probes, and they must be ordered separately.

• Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
• Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
• Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses
• Analyze and troubleshoot the trends using the cursors and zoom tools in real-time
• The 600 V CAT IV/1000 V CAT III rating (for use at the service entrance) boosts the highest safety rating in the industry
• Measure all three phases and neutral with the included four flexible current probes
• Probes feature an enhanced thin flex design to fit into the tightest places
• Every measurement is always automatically recorded, without any set-up.
• Monitor ten power quality parameters on one screen according to EN50160 power quality standard
• Configure for any test condition with memory for up to 600 parameters at user defined intervals
• View graphs and generate reports With included analysis software
• Seven hours operating time per charge on one Lithium-ion battery pack
• Download data to PC wirelessly and capture screens using Fluke Connect® App

Product Specifications
	Model	Measurement Range	Resolution	Accuracy
Volt
V_rms (AC + DC)	434-II	1 V - 1000 V, phase to neutral	0.1 V	+/- 0.5% of nominal voltage****
V_rms (AC + DC)	435-II and 437-II	1 V - 1000 V, phase to neutral	0.01 V	+/- 0.1% of nominal voltage****
V_pk		1 V_pk - 1400 V_pk	1 V	5% of nominal voltage
Voltage Crest Factor (CF)		1.0 > 2.8	0.01