Fluke Calibration

5610 / 5611 / 5611T / 5665 Temperature Probes, Reference...

Lab-grade thermistors probes for accurate work across a narrow temperature range

Starting At
$1,105.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

Hundreds of thousands of thermistors and temperature probes are sold every year, but only a few have the stability necessary for use as high-accuracy thermometry standards. If you're looking for economical lab-grade thermistor probes for accurate work across a narrow temperature range, Fluke Calibration Secondary Reference Series thermistor probes are the best you can buy.

These temperature probes are available in a variety of sheath materials appropriate for your specific application. In addition to our metal-sheathed temperature probes, we offer flexible PTFE encapsulated and silicone coated thermistors that have smaller tips and can measure those places where even a metal-sheathed thermistor can't reach.

All Fluke Calibration secondary reference thermistors have small diameters and very small sensing elements, which means they require far less immersion than a PRT to avoid errors caused by stem effect. Self heating is usually negligible, giving them an advantage when taking measurements in air. Their small size also improves response time, allowing measurements to be taken more quickly.

If your application involves frequent handling, you'll be especially interested to know thermistors are less susceptible to mechanical shock than PRTs. The bottom line may be better accuracy in fieldwork.

Additionally, higher base resistance and larger resistance coefficients make it easier to achieve precision readings with thermistors, so better resolution and accuracy are possible for a lower cost. All of these thermistors have a negative temperature coefficient of resistance (NTC).

What's more, the Secondary Reference Series Thermistors are accurate to +/- 0.01 °C and cover the temperature range of 0°C - 100°C. They come with a NIST-traceable calibration and a resistance-versus-temperature table printed in 0.1°C increments that can be interpolated to 0.0001 °C. NVLAP accredited calibrations as single thermistors or as systems combined with their readouts, are also available.

These probes come in a complete assembly ready for use, and each works well with the uncertainties of our thermometer readouts: the 1504 Tweener, the 1523 and 1524 Handheld Thermometers, the 1529 Chub-E4, the 1560 Black Stack, and the 1575A and 1590 Super-Thermometers.  These probes provide most accurate readings when coupled with a 2563 Standards Thermistor Module or 1590 Super-Thermometer, but they are most portable when used with a handheld reference thermometer.

• Temperature probes with short-term accuracy to +/- 0.01°C; one-year drift < +/- 0.01°C
• Accredited NVLAP calibration optional
• Flexible PTFE and silicone coated fast-response models
• Rugged polished stainless steel sheaths

Resistance Nominal 10,000 Ω at 25C
Range 0C - 100C
Calibration R vs. T table with 0.1C increments, interpolation equation furnished
Calibration Uncertainty Table and equation are accurate to +/- 0.01C
Optional accredited calibration uncertainties +/- 0.006C
Drift Better than +/- 0.01C per year (k = 3)
Repeatability Better than +/- 0.005C
Termination Specify when ordering.
Plastic probe carrying case for probes up to 228 mm (9 in) in length
Normally ships in 1-2 Weeks
$205.00 CAD