607D DIN Rail Mount Differential Pressure Transmitter

Wide range of models are available factory calibrated to 0.25% full scale accuracy, ranges from 0.1 in W.C. - 25 in W.C.

Starting At
$462.00 CAD
Normally ships in 3-4 Weeks

Configure   Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

Series 607D DIN Rail Mount Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4 - 20 mA output signal. The 607D housing is specifically designed to mount on a 35 mm DIN rail in a panel. This mounting style allows for several units to be mounted closely together reducing required space. A wide range of models are available factory calibrated to 0.25% full scale accuracy in ranges from the very low 0.1 in W.C. - 25 in W.C. The span and zero controls are for field calibration. Units also include red/green LED status of proper transmitter operation. Versatile circuit design enables operation in 2-wire current loops.

• High accuracy at low pressure ranges provides exceptional measurement for insuring tight-control and minimizing costly out of specification conditions
• DIN mountable allows use in control panels for easy access to electrical supply reducing costly cabling
• Visual LED indicators provides quick status on transmitter operation saving troubleshooting time

Service Air and non-conductive, noncorrosive gases
Wetted Materials 302 SS, glass, nickel, silicone rubber and brass
Accuracy 0.25% FS* at room temperature.
*RSS includes nonlinearity, hysteresis and nonrepeatibility
Stability 1% FS/yr
Temperature Limits Operating and compensated: 0F - 170F (-18C - 77C);
Storage: -65F - 185F (-54C - 85C)
Pressure Limits 15 psi (100 kPa)
Thermal Effects (Includes zero and span) 0.01 FS/F, 20F - 170F (-7C - 77C)
Power Requirements 16 - 32 VDC
Output Signal 4 - 20 mA
Zero Adjustment Potentiometer for zero
Response Time Approximately 10 ms
Max. Loop Resistance DC: 0 Ω - 800 Ω
Electrical Connections Screw-type removable terminal block
Process Connections Barbed fittings for 1/8 in (3.12 mm) ID rubber or vinyl tubing
Mounting Orientation Vertical, on a 1.378 in (35 mm) DIN rail
Weight 7.0 oz (198 g)
Agency Approval CE

• Clean room control
• Filter status