Fluke

62 MAX+ / 323 / 1AC IR Thermometer, Clamp Meter and Volt...

Solve problems quicker by testing first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem


$453.00 CAD
Normally ships in 3-4 Weeks

 
  Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use the clamp meter and voltage detector to find out more about the problem.

Kit includes the Fluke 62 MAX+ Infrared Thermometer, the Fluke 323 True-RMS Clamp Meter, the Fluke 1AC II VoltAlert Voltage Detector, and the C115 soft case.

Fluke 62 MAX+ Infrared Thermometer:
• Dust and water-resistant: IP54 rated
• Rugged: 3 m (9.8 ft) drop tested
• Ergonomically designed: Completely redesigned for a more natural hand fit
• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured
• Large, backlit display: Makes data easier to read, even in dark areas

Fluke 323 True-RMS Clamp Meter:
• 400 A AC current measurement
• 600 V AC and DC voltage measurement
• True-RMS AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 kΩ with continuity detection
• Slim, ergonomic design
• CAT IV 300V/CAT III 600 V safety rating

Fluke 1AC II VoltAlert™ Voltage Detector:
• Voltbeat™ technology and continuous self-test, so always know it’s working
• Upon detection, tip glows and beeper sounds
• Voltage detection of 90 V - 1000 V AC
• CAT IV 1000 V for added protection

Fluke C115 Soft Case:
• Lightweight soft case to provide optimal protection and accessory storage

Fluke 62 MAX+ Infrared Thermometer

Specifications

Temperature Range

-30°C - 650°C (-22°F - 1202°F)

Accuracy

+/- 1.0°C or +/- 1.0% of reading, whichever is greater
-10°C to 0°C: +/- 2.0
-30°C to -10°C: +/- 3.0

Response Time (95%)

Fluke 62 MAX+

< 300 ms (95% of reading)

Spectral Response

8 µs - 14 µs

Emissivity

0.10 - 1.00

Optical Resolution

12:1 (calculated at 90% energy)

Display Resolution

0.1°C (0.2°F)

Repeatability of Readings

+/- 0.5% of reading or < +/- 0.5°C (1°F), whichever is greater

Power

AA battery

Battery Life

8 h with laser and bACklight on

Weight

255 g (8.99 oz)

Size

175 mm x 85 mm x 75 mm (6.88 in x 3.34 in x 2.95 in)

Temperature

Operating

0°C - 50°C (32°F - 122°F)

Storage

-20°C - 60°C (-4°F - 140°F), (without battery)

Operating Humidity

10% - 90% RH, Non-condensing at 30°C (86°F)

Altitude

Operating

2,000 m above mean sea level

Storage

12,000 m above mean sea level

IP Rating

IP 54 per IEC 60529

Drop Test

3 m

Vibration and Shock

IEC 68-2-6 2.5 g, 10 Hz - 200 Hz, IEC 68-2-27, 50 g, 11 ms

EMC

EN 61326-1:2006 EN 61326-2:2006

Standards and Agency Approval

Compliance

EN/IEC 61010-1: 2001

Laser Safety

FDA and EN 60825-1 Class II

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  
 

Fluke 323 True-RMS Clamp Meter

Specifications

AC Current

Range

400.0 A

Accuracy

2% +/- 5 digits
(45 Hz - 65 Hz)
2.5% +/- 5 digits
(65 Hz - 400 Hz)

AC Voltage

Range

600.0 V

Accuracy

1.5% +/- 5 digits

DC Voltage

Range

600.0 V

Accuracy

1.0% +/- 5 digits

Resistance

Range

400.0 Ω / 4000 Ω

Accuracy

1.0% +/- 5 digits

Continuity

≤ 70 Ω

AC Response

True-RMS

Data Hold

Yes

Size

H x W x D

207 mm x 75 mm x 34 mm

Max. Wire Diameter

30 mm (600 MCM)

Weight

265 g

Category Rating

CAT III 600 V / CAT IV 300 V

Warranty

2 year

 

 

 

 

 

Fluke 1AC-II VoltAlert Voltage Detector

Specifications

Operating Principle

Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage Sensing Ranges

Nominally, 90 V AC - 1000 V AC or 200 V AC - 1000 V AC depending on model, 45 Hz -  405 Hz; also a 20 V - 90 V control circuit model

Detector Tip Style

Blade or round, depending on model

Light Source

One (1) high intensity red LED

Agency Approvals

c CSA us, CE, C-Tick

Safety Rating

1000 V, CAT IV

IP Rating

IP 40

Operating Temperature

-10°C - 50°C

Operating Humidity Ranges

95 %

 (0°C - 30°C)

75 %

 (30°C - 40°C)

45 %

 (40°C - 55°C)

Operating Altitude

3,000 m

Batteries

2 AAA alkaline batteries included


Note: Product does not respond to random electrostatic discharge.