789 ProcessMeter
Ultimate troubleshooting tool that combines the functionality of a loop calibrator w/ the power of a digital multimeter
Fluke 789 ProcessMeter™ doubles your troubleshooting power
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smart phone and review it from a remote location.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.
Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.
Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.
• Compact digital multimeter and mA loop calibrator solution
• Full-featured mA loop calibrator with built-in 24v Loop Power
• Quickly and easily troubleshoot every part of a control loop
• Large, bright dual-measurement display
Specifications | ||
Current Measurement | Range | 0 - 1 A AC or DC |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD (DC) | |
Range | 0 mA -30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 lSD | |
Current Sourcing | Range | 0-20 mA or 4 - 20 mA |
Resolution | 0.05% of span | |
Drive capability | 24 V compliance or 1200 Ω @ 20 mA | |
Frequency | To 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 Ω | |
Voltage Measurement | Range | 0 V - 1000 V AC (True-RMS) or DC |
Resolution | 0.1 mV - 1.0 V | |
Accuracy | 0.1% RDG + 1 LSD (VDC) | |
Resistance Measurement | To 40 MΩ, 0.2% + 1 LSD | |
Diode Test | 2.0 V shoes diode voltage drop | |
Display Current and % of Span | Yes | |
Auto Step, Auto Ramp | Yes | |
Environmental Specifications | ||
Operating Temperature | -20°C - 55°C | |
Storage Temperature | -40°C - 60°C | |
Humidity (Without Condensation) | 95% up to 30°C | |
Temperature Coefficient | 0.05 x (specified accuracy) per ºC (for temperatures < 18ºC or > 28ºC) | |
Safety Specifications | ||
Electrical Safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 | |
Overvoltage Category | IEC 1010-1 CAT III 1000 V | |
Maximum Voltage | 1000 Vrms | |
Mechanical and General Specifications | ||
Size (H x W x L) | 50 mm x 100 mm x 203 mm (1.25 in x 3.41 in x 7.35 in) | |
Weight | 610 g (1.6 lbs) | |
Batteries | Four (4) AA alkaline batteries | |
Warranty | 3 years | |
Battery Life | 140 h typical (measurement), 10 h typical (sourcing 20 mA) | |
Shock and Vibration | Random, 2 g, 5 Hz - 500 Hz | |
Item
Description
Availability
Price
Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement
Normally ships in 4-6 Weeks
$88.00 CAD
Improve steadiness in slipper hands with comfortable rubber overmolded surfaces and finger-hugging curves to give a reliable grip so you can focus on making an accurate measurement
Normally ships in 4-6 Weeks
$73.00 CAD
Improve steadiness in slipper hands with comfortable rubber overmolded surfaces and finger-hugging curves to give a reliable grip so you can focus on making an accurate measurement
Normally ships in 4-6 Weeks
$86.00 CAD
One pair of flat, right angle design for connecting to bus bars
Normally ships in 4-6 Weeks
$86.00 CAD
Probe pierces insulated wire making contact for accurate readings
Normally ships in 4-6 Weeks
$84.00 CAD
Five (5) pairs (red and black) of double 4 mm banana plugs, each with 3.1 mm for mounting wires and components
Normally ships in 4-6 Weeks
$86.00 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
Normally ships in 4-6 Weeks
$44.00 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
Normally ships in 4-6 Weeks
$41.00 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
Normally ships in 4-6 Weeks
$41.00 CAD
SureGrip industrial test probes
Normally ships in 4-6 Weeks
$44.00 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals
Normally ships in 4-6 Weeks
$41.00 CAD
One pair (red, black) with IC insulated caps to prevent shortening of IC legs for probing high-density components or boards
Normally ships in 4-6 Weeks
$72.00 CAD
High voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter
Normally ships in 4-6 Weeks
Starting At
$326.00 CAD
$326.00 CAD
Accomodates Fluke 120 Series ScopeMeter Test tool or a handheld digital multimeter, both main instrument and test accessories
Normally ships in 4-6 Weeks
$91.00 CAD
Rugged construction with heavy duty stitching, reinforced rivets, and oil tanned for a long life
Normally ships in 4-6 Weeks
$140.00 CAD
Zippered carrying case with detachable external pouch
Normally ships in 4-6 Weeks
$130.00 CAD
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case that floats in salt water
Normally ships in 4-6 Weeks
$392.00 CAD
Protect your meter and conveniently carry it from one job to the next with this handy carrying case
Normally ships in 4-6 Weeks
$80.00 CAD
Durable, zippered carrying case with padding, an inside pocket, and high-quality polyester exterior and carries most of Fluke's popular digital multimeters
Normally ships in 4-6 Weeks
$80.00 CAD
Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters
Normally ships in 4-6 Weeks
$75.00 CAD
Converts a DC voltmeter with a input impedance of 10 MΩ into a high frequency (100 kHz - 500 MHz) RF voltmeter
Normally ships in 4-6 Weeks
$543.00 CAD
This basic electronic test lead kit has the fundamental accessories for testing electronics, and includes the Fluke TL71 premium test lead set
Normally ships in 4-6 Weeks
$159.00 CAD
Type K thermocouple for use in air and non-caustic gas measurements
Normally ships in 4-6 Weeks
$251.00 CAD
Type K thermocouple with tapered tip for use in air, non-caustic gas and surface applications
Normally ships in 4-6 Weeks
$251.00 CAD
Universal temperature probe compatible with Fluke digitalmultimeters
Normally ships in 4-6 Weeks
$564.00 CAD
Converts a digital multimeter into a thermometer
Normally ships in 4-6 Weeks
$312.00 CAD
This test lead set with test probes works in multiple electrical applications while the SureGrip feature is designed to do your work with comfort
Normally ships in 4-6 Weeks
$150.00 CAD
Ideal starter kit for electrical applications that includes 3 test lead accessories in an all-in-one set
Normally ships in 4-6 Weeks
Starting At
$150.00 CAD
$150.00 CAD
These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed
Normally ships in 4-6 Weeks
$60.00 CAD
Provides comfort grip probes with silicone insulated, right-angle test leads
Normally ships in 4-6 Weeks
$60.00 CAD
Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more
Normally ships in 4-6 Weeks
$295.00 CAD
Test lead holder with 10 slots for wires
Normally ships in 4-6 Weeks
$57.00 CAD
Digital multimeter test leads (red, black) with safety shrouded, standard diameter banana plugs
Normally ships in 4-6 Weeks
$72.00 CAD
One pair (red, black) of silicone insulated leads with straight connectors on both ends
Normally ships in 4-6 Weeks
$60.00 CAD
Digital multimeter test leads (red, black) with safety shrouded, standard diameter banana plugs
Normally ships in 4-6 Weeks
$60.00 CAD
Test lead accessory kit especially designed for working in high energy environments
Normally ships in 4-6 Weeks
$156.00 CAD
Test lead set provides 5 ways to connect depending on the terminals
Normally ships in 4-6 Weeks
$124.00 CAD
Silicone insulated leads useable from -80°C - 70°C (-112°F - 158°F)
Normally ships in 1-2 Weeks
$107.00 CAD
One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 mm - 76 mm
Normally ships in 4-6 Weeks
$94.00 CAD
PVC insulated test leads with right-angle shrouded banana plugs recommended for general purpose measurements
Normally ships in 4-6 Weeks
$50.00 CAD
One pair (red, black) 1.5 meter long silicone test leads with right angle shrouded banana plug
Normally ships in 4-6 Weeks
$71.00 CAD
Electronic test probe set with very small 1 mm tips to access hard to reach test points
Normally ships in 4-6 Weeks
$136.00 CAD
1 pair (red, black) multi-stacking 4 mm banana plug patch cords, 60 cm
Normally ships in 4-6 Weeks
$46.00 CAD
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks
Normally ships in 4-6 Weeks
$57.00 CAD
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers
Normally ships in 4-6 Weeks
$90.00 CAD
1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks
Normally ships in 4-6 Weeks
$68.00 CAD
A handy all-in-one test kit includes three (3) different test lead sets
Normally ships in 4-6 Weeks
$177.00 CAD
Test and maintain fiber optic cable without having to buy a whole new meter
Normally ships in 4-6 Weeks
$726.00 CAD
View All Part Numbers