`
Used to activate alarm circuits in hazardous and or wet, corrosive industrial applications
These Fire Alarm Stations are used to activate alarm circuits in hazardous and/or wet, corrosive industrial applications. The fire alarms are of the break-glass type construction.
Two styles of stations are available:
Automatic Model– after glass is broken, actuator is automatically released to activate alarm circuit.
Manual Model– after glass is broken, actuator must be pushed to activate alarm circuit.
• The Fire Alarm Station is made from corrosion resistant fiberglass reinforced polyester. The enclosure is molded from highly visible bright red material.
• The enclosure gasket is made from polyurethane and is installed into recessed cover groove.
• The cover screws are captivated, slotted and made of 316 grade stainless steel.
• 1/2” and 3/4” hubs are available in dead-end and feed-thru configurations.
• A hammer is mounted to the side of the alarm station and is attached by an 11” chain.
NEC | Class I, Zones 1 & 2 AEx de IIC T6 Class I, Division 2, Groups A,B,C,D Class II, Division 2, Groups F,G Class III Type 3, 4 & 4X; IP66 FILE No. E182378 |
CEC | Class I, Zones 1 & 2 Ex de IIC T6 Class I, Division 2, Groups A,B,C,D Class II, Divisions 1 & 2, Groups E,F,G Class III CSA ENCLOSURES 3, 4 & 4X; IP66 CERTIFIED - FILE No. LR99480 II 2 G Ex de IIC T6, Zones 1 & 2, IP66 PTB 01 ATEX 1105 |
R. Stahl 8146 Series Fire Alarm Stations - Data Sheet 385.8 KB |