87V Industrial Multimeter

Lets you identify complex electrical problems fast

Starting at

$786.79CAD

Have questions? We're here to help!

Call

Configure

Used in

Also found in

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

• Easy-access door for fast battery changes without breaking the calibration seal

• Analog bar graph for fast changing or unstable signals

• Large digit display with bright, two-level backlight for easier reading in low light

• Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

Built to highest safety standards

All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

Removable holster with built in test lead and probe storage for convenience

The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

• Identify complex signal problems fast

• Supports accurate measurements on VFDs using a low-pass filter

• Captures intermittents as fast as 250 µS with Peak Capture

80 BK Temperature Probe	–40.0 °C – 260 °C –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater
Conductance	Maximum conductance: 60.00 nS Accuracy:±(1.0% + 10) Maximum resolution:0.01 nS
Diode	Range: 3 V Resolution: 1 mV Accuracy: ±(2% + 1)
Duty Cycle Range	Accuracy: Within ±(0.2% per kHz + 0.1%)
Operating Temperature	–20 °C to + 55 °C
Storage Temperature	–40 °C to + 60 °C
Humidity (Without Condensation)	0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C)
Operating Altitude	2000 m
Overvoltage Category	EN 61010–1 to 1000 V CAT III, 600V CAT IV
Agency Approvals	CE, CSA, RCM
Size	201 x 98 x 52 mm (with holster)
Weight	355 g 624 g – with holster
Display	Digital: 6000 counts updates 4/sec. 19,999 counts in high–resolution mode Analog:32 segments, updates 40/sec Frequency:19,999 counts, updates 3/sec at > 10 Hz
Warranty	Lifetime
Battery Life	Alkaline: ~400 hours typical, without backlight
Voltage DC	Maximum voltage: 1000 V Accuracy: ±(0.05% + 1) Maximum resolution: 10 µV
Voltage AC	Maximum voltage: 1000 V Accuracy:±(0.7% + 2) True RMS AC bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution: 0.1 mV
Current DC	Maximum amps: 10 A (20 A for 30 seconds maximum) Amps accuracy: ±(0.2% + 2) Maximum resolution: 0.01 µA
Current AC	Maximum amps: 10 A (20 A for 30 seconds maximum) Amps accuracy: ±(1.0% + 2) True RMS Maximum resolution: 0.1 µA
Resistance	Maximum resistance: 50 MΩ Accuracy: ±(0.2% + 1) Maximum resolution: 0.1 Ω
Capacitance	Maximum capacitance: 9,999 µF Accuracy: ±(1% + 2) Maximum resolution: 0.01 nF
Frequency	Maximum frequency: 200 kHz Accuracy: ±(0.005% + 1) Maximum resolution: 0.01 Hz
Duty Cycle	Maximum duty cycle: 99.9% Accuracy:±(0.2% per kHz + 0.1%) Maximum resolution:0.1%
Temperature Measurement	–200.0 °C – 1090 °C –328.0 °F – 1994.0 °F excluding probe
Shock	1 Meter drop per IEC 61010–1:2001
Vibration	Per MIL–PRF–28800 for a Class 2 instrument