The 87V MAX contains all the trusted features of the most popular digital multimeter used today, the Fluke 87V, and then some. From wet, dusty or dark environments to long days, the 87V MAX was designed to help you finish the most on a work site. It features a unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment; using true-rms ac voltage and current for accurate measurements on non-linear signals.
Fluke’s most rugged digital multimeter
The 87V MAX is built with an IP67 rated, industrial-strength case and a removable holster. The holster doubles as a test probe holder for easier, one-handed operation. This meter is fully waterproof and dust proof keep working reliably no matter where your job takes you.
4-meter Drop tested
• The meter is designed to survive drops up to 4-meters (13 feet)
Withstands hot and cold environments
• Rely on accurate measurements with the extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C.
Easy-to-read measurements
The large display digits and 2-level bright, white backlight and backlit keypad buttons make for increased visibility. Along with the high resolution 19,999 count display mode allows you to read measurements easily in any work environment. This multimeter will run for up to 800 hours of battery life and offers measurement capabilities
• up to 1000 V ac and dc and up to 10 A (20 A for 30 seconds)
• frequency to 200 kHz
• min/max/average recording, plus 250 μs Peak min-max to capture variations automatically or
• use the built-in thermometer
• Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
• Waterproof, dustproof IP67 case for the most extreme work sites
• Premium TL175 TwistGuard™ test leads
• Double the battery life of the 87V (up to 800 hours); backlit keys for dark environments
| DC Voltage | Range: 0.1 mV to 1000 V Accuracy: ±(0.05% + 1) Maximum resolution: 0.1 mV |
| AC Voltage | Range: 0.1 mV to 1000 V Accuracy: ±(0.7% + 4) true-rms AC bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution: 0.1 mV |
| DC Current | Range: 0.1 μA to 10 A (20 A for 30 seconds maximum) Amps accuracy: ±(0.2% + 2) Maximum resolution: 0.1 µA |
| AC Current | Range: 0.1 μA to 10 A (20 A for 30 seconds maximum) Amps accuracy: ±(1.0% + 2) true-rms Maximum resolution: 0.1 µA |
| Resistance | Range: 0.1 Ω to 50 MΩ Accuracy: ±(0.2% + 1) Maximum resolution: 0.1 Ω |
| Capacitance | Accuracy: ±(1% + 2) Maximum resolution: 0.01 nF |
| Frequency | Range: 0.5 Hz to 199.99 kHz Accuracy: ±(0.005% + 1) Maximum resolution: 0.01 Hz |
| Duty cycle | Maximum duty cycle: 99.9% Accuracy: ±(0.2% per kHz + 0.1%) Maximum resolution: 0.1% |
| Temperature measurement range | –200.0 °C to 1090 °C –328.0 °F to 1994.0 °F excluding probe |
| 80 BK temperature probe | –40.0 °C to 260 °C, ± 2.2 °C or 2% whichever is greater –40.0 °F to 500 °F, ± 4.0 °F or 2% whichever is greater |
| Conductance | Maximum conductance: 60.00 nS Accuracy: ±(1.0% + 10) Maximum resolution: 0.01 nS |
| Diode test | Range: 2V Resolution: 0.001V Accuracy: ±(1% + 1) |
| Diagnostics and data storage | Peak Min/Max: 250 μS Min/Max/Avg: Yes Reading hold/Auto (Touch) Hold: Yes Relative reference: Yes |
| Display | Digital: 6000 counts updates 4/second 19,999 counts in high–resolution mode Analog bar graph: 32 segments, updates 40/second Backlight: Two level |
| Low pass filter (VFD measurements) | Yes |
| Input Alert™ | Yes |
| Safety rating | IEC61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600 V, CAT III 1000 V |
| Agency approvals | CE, CSA |
| IP Rating | IEC 60529: IP67 |
| Power | Three AA batteries. 800 hours typical, without backlight |
| Size | 6.0 x 10.1 x 21.5 cm (with holster) |
| Weight | 698.5 g (with holster) |
| Warranty | Limited lifetime |
| Operating temperature | -15 °C to 55 °C, to -40 °C for 20 minutes when taken from 20 °C |
| Storage temperature | -40 °C to + 60 °C |
| Humidity (without condensation) | 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) |
| Operating altitude | 2000 m |
Item
Description
Availability
Price
Voltage detector and LED flashlight combined into one easy-to-use instrument (pack of 12)
Normally ships in 4-6 Weeks
$74.00 CAD
Accomodates Fluke 120 Series ScopeMeter Test tool or a handheld digital multimeter, both main instrument and test accessories
Normally ships in 4-6 Weeks
$73.00 CAD
Rugged ballistic cloth with heavy duty hardware, including a steel reinforced frame
Normally ships in 4-6 Weeks
$181.00 CAD
Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof case that floats in salt water
Normally ships in 4-6 Weeks
$342.00 CAD
Quality test leads with adjustable length test tips for use in different measurement environments and increased safety
Normally ships in 4-6 Weeks
Starting At
$60.00 CAD
$60.00 CAD
This test lead set with test probes works in multiple electrical applications while the SureGrip feature is designed to do your work with comfort
Normally ships in 4-6 Weeks
$144.00 CAD
Highly reliable and accurate current clamp that measures 1 A to 1000 A without breaking the circuit
Normally ships in 4-6 Weeks
Starting At
$699.00 CAD
$699.00 CAD
Used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers
Normally ships in 4-6 Weeks
$726.00 CAD
High voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter
Normally ships in 4-6 Weeks
Starting At
$288.00 CAD
$288.00 CAD
View All Part Numbers