ACD-10-PLUS 600 A Clamp Multimeter

Thin jaws allow access to tight measurement areas while still handling conductors up to 1.0 in (25 mm)

Starting At
$110.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters at only 0.4 in (10mm) thick,  allowing access to tight measurement areas and still handles conductors up to 1.0 in (25mm).  It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including AC/DC current and voltage, capacitance, and frequency.

The ACD-10 PLUS is available with True-RMS (ACD-10 TRMS-PLUS).

The ACD-10 PLUS and ACD-10 TRMS-PLUS clamp multimeters come with test leads, one 3 V coin battery (installed), user’s manual, and a soft carrying pouch.



• AC and DC Voltage to 600 V
• AC Current to 600 A
• Thin jaws, only 10 mm (0.4 in) thick
• Resistance to 40 MΩ
• Continuity buzzer
• Capacitance to 3000 µF
• Frequency measurement
• In rush current
• Hold & maximum reading functions
• Accommodates conductors up to 26 mm (1.02 in) in diameter
• Auto ranging
• Auto power off
• Rubber over-molded case
• Overload protected
• True-RMS measurement (ACD-10 TRMS-PLUS only)
• Included accessories: test leads, battery installed, soft carrying pouch, and users manual






AC Voltage

4.000 V, 40.00 V, 400.0 V, 600 V

DC Voltage

400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V

AC Current

40.00 A, 400.0 A, 600 A


400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ


500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF


40 Hz - 400 Hz with Jaw, 10 Hz - 100 kHz with test leads




Dual Displays



Micro Amps



Accommodates Conductors

up to 1.0 in (25 mm) in diameter


3-3/4 digits 4000 counts LCD display

Update Rate

3 per second nominal



Operating Temperature

0°C - 40 °C; < 80% RH for temperature up to 31°C decreasing linearly to 50% RH at 40°C


Operating below 2000 m; indoor use

Storage Temperature

-20 °C to 60 °C, < 80% RH (with battery removed)

Temperature Coefficient

nominal 0.15 x (specified accuracy)/°C @ (0°C - 18°C or 28°C - 40°C)

Low Battery

Below approx. 2.4V

Power Supply

3 V coin battery IEC-CR2032

Power Consumption

2.8 mA typical except that 3.3 mA typical for ACA function

APO Timing

Idle for 30 min

APO Consumption

5 µA typical

Jaw Opening and Conductor Diameter

max 26 mm

Special Features

30 ms Max Hold; Data Hold; Relative Zero mode


For complete specifications please download the product data sheet under the “Resources” tab.