The AD590 is a small IC temperature sensor that converts a temperature input into a proportional current output.
The advanced technology in the AD590 is especially suited for special temperature measurement and control applications between –55 and 150°C when solid state reliability, linearity and accuracy are required. The AD590 temperature sensor can be used to determine minimum, average, and differential temperatures, in addition to being used for thermocouple cold junction compensation and temperature control applications. The size and responsiveness of the AD590 IC Sensor makes it perfect for uses where size is a consideration, such as on PC boards or heat sinks.
Just power up and measure absolute temperature (Kelvin). No linearization, amplification or cold junction compensation is required.
• Linear Current Output
• Broad Range -55 to 150°C
• No Linearization Circuity Required
• Versatile and Economical
• Fast Response Two Styles Available
• Low-Cost Metal TO-52 Case
• Miniature Ceramic Flat Pack Two Accuracies Available U J for Low Cost
• K for Increased Accuracy Applications
• Ideal for Fast Response Surface Measurements
• Sensors for Controllers and Meters
• Use in Custom-Made Probes
• Use on PC Boards for Accurate Measurement
| Absolute Maximum Ratings Forward Voltage (E+ to E- ) | +44 V |
| Reverse Voltage (E+ to E–) | –20 V Breakdown Voltage |
| (case to E+ or E–) | ±200 V |
| Lead Temperature | 300°C |
| Voltage Range | +4 to +30 Vdc Nominal Current Output at 25°C |
| (298.2 K) | 298.2 µA Nominal Temperature Coefficient: 1 µA/K |
| Calibration Error J | ±5.0°C |
| Maximum K | ±2.5°C) |
| Absolute Error | w/o external |
| Calibration Adjustment | |
| J: ±10.0°C maximum (K | ±5.5°C); |
| W/25°C error set to zero J | ±3.0°C |
| maximum (K | ±2.0°C) |
| Repeatability | ±0.1°C maximum |
| Long-Term Drift | ±0.1°C/month max. |
View All Part Numbers