AT-8000 Advanced Industrial Wire Tracer Kit
First CAT IV 600 V Advanced Wire Tracer Series designed to protect electricians from the most dangerous level of transient overvoltage spikes up to 8,000 V
The AT-8000 is the first CAT IV 600 V Advanced Wire Tracer Series designed to protect electricians from the most dangerous level of transient overvoltage spikes up to 8,000 V known to occur in industrial environments. The Receiver is equipped with patented Smart Sensor™ technology, which finds and displays the location and orientation of Energized wires in walls, floors and ceilings on the large color TFT LCD screen.
The Scan and Locate feature clearly identifies the single correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools. Embedded help screens make set-up easy and error free for novice users and experts alike.
Featuring three power modes “high”, “low”, and “loop” and two output frequencies (6 kHz and 33 kHz), the AT-8000-T Transmitter incorporates the best technologies available for optimal wire tracing and breaker identification on both energized and de-energized circuits. The AT-8000-T automatically sets the signal based on detected voltage and prompts the user to set the power level based on the application, delivering consistently accurate results.
The AT-8030 kit includes the CT-400 Signal Clamp for inducing signal into wires without access to bare conductors.
Whats Included:
• AT-8000-R Receiver
• AT-8000-T Transmitter
• TL-8000-INT Test lead & accessory kit*
• CC-8000 Hard carrying case
• 12 x 1.5 V AA batteries (AT-8020)
• 12 x Rechargeable 1.5 V AA batteries (AT-8030)
• 3 x Battery chargers (AT-8030)
• HS-1 Magnetic hanger (AT-8030)
• CT-400 Signal clamp (AT-8030)
* TL-8000-INT test lead and accessory kit includes:
• 2 x 1 m Test leads (red, black)
• 1 x 7 m Test lead (green)
• 2 x Alligator clips (red, black)
• 2 x Outlet blade adapter (red, black)
• 2 x Outlet round adapter (red, black)
• User interface that provides wire direction compass and Receiver alignment capability with conductor through Smart Sensor™ technology
• Safety rated to CAT IV 600 V to work with Energized cables in industrial environments
• Two operating frequencies for Energized and De-Energized circuits: Energized: 6.25 kHz, De-energized: 32.768 kHz
• Non-Contact Voltage Detection
• Ten adjustable Receiver sensitivity levels
• Hi-contrast Receiver LCD
• Includes the CT-400 Signal Clamp for signal induction, HS-1 Magnetic Hanger to optionally hang Transmitter, and rechargeable batteries and battery chargers (AT-8030)
• Attaches to TIC-410A Hot Stick for extended reach (TIC-410A sold separately)
| Display Size | AT-8000-R Receiver: LCD 3.5 in (89 mm) AT-8000-T Transmitter: LEDs CT-400 Signal Clamp (AT-8030): N/A |
| Display Dimensions (W x H) | AT-8000-R Receiver: 2.76 x 2.07 in (70 x 52 mm) AT-8000-T Transmitter: N/A CT-400 Signal Clamp (AT-8030): N/A |
| Display Resolution | AT-8000-R Receiver: 320 x 240 AT-8000-T Transmitter: N/A CT-400 Signal Clamp (AT-8030): N/A |
| Display Type | AT-8000-R Receiver: LCD 3.5 in (89 mm) AT-8000-T Transmitter: LEDs CT-400 Signal Clamp (AT-8030): N/A |
| Display Colour | AT-8000-R Receiver: Yes AT-8000-T Transmitter: Operating mode LEDs - red Battery status LEDs - green, yellow, red CT-400 Signal Clamp (AT-8030): N/A |
| Booting Time | AT-8000-R Receiver: 30 sec AT-8000-T Transmitter: < 2 sec CT-400 Signal Clamp (AT-8030): N/A |
| Backlight | AT-8000-R Receiver: Yes AT-8000-T Transmitter: N/A CT-400 Signal Clamp (AT-8030): N/A |
| Operating Temperature | AT-8000-R Receiver: -4 °F to 122 °F (-17.77 °C to 49 °C) AT-8000-T Transmitter: -4 °F to 122 °F (-20 °C to 50 °C) CT-400 Signal Clamp (AT-8030): 32 °F to 122 °F (0 °C to 50 °C) |
| Operating Humidity | AT-8000-R Receiver: 45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) AT-8000-T Transmitter: 45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) CT-400 Signal Clamp (AT-8030): 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to <122 °F (40 °C to <50 °C) |
| Storage Temperature & Humidity | AT-8000-R Receiver: -4 °F to 158 °F (-20 °C to 70 °C), <95% RH AT-8000-T Transmitter: -4 °F to 158 °F (-20 °C to 70 °C), <95% RH CT-400 Signal Clamp (AT-8030): -4 °F to 140 °F (-20 °C to 60 °C), <95% RH |
| Operating Altitude | AT-8000-R Receiver: 0 to 6561 ft (2000 m) |
| Transient Protection | AT-8000-R Receiver: N/A AT-8000-T Transmitter: 8.00 kV (1.2/50μS surge) CT-400 Signal Clamp (AT-8030): N/A |
| Pollution Degree | AT-8000-R Receiver: 2 |
| IP Rating | AT-8000-R Receiver: IP 52 AT-8000-T Transmitter: IP 40 |
| Drop Test | AT-8000-R Receiver: 3.28 ft (1 m) |
| Power Supply | AT-8000-R Receiver: 4 x AA (alkaline) AT-8000-T Transmitter: 8 x AA (alkaline) CT-400 Signal Clamp (AT-8030): N/A |
| Power Consumption (Typical) | AT-8000-R Receiver: 4xAA battery: 2W AT-8000-T Transmitter: Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA CT-400 Signal Clamp (AT-8030): N/A |
| Battery Life | AT-8000-R Receiver: Approx. 9 h AT-8000-T Transmitter: Hi mode: approx. 25 h Loop mode: approx. 18 h CT-400 Signal Clamp (AT-8030): N/A |
| Low Battery Indication | AT-8000-R Receiver: Yes CT-400 Signal Clamp (AT-8030): N/A |
| Fuse | AT-8000-R Receiver: N/A AT-8000-T Transmitter: 1.6 A, 700 V, fast-acting, Ø 6x32mm CT-400 Signal Clamp (AT-8030): N/A |
| Maximum Conductor Size | AT-8000-R Receiver: N/A AT-8000-T Transmitter: N/A CT-400 Signal Clamp (AT-8030): 1.26 in (32 mm) |
| Dimensions (L x W x H) | AT-8000-R Receiver: Approx. 10.92 x 4.43 x 2.55 in (27.75 x 11.25 x 6.5 cm) AT-8000-T Transmitter: Approx. 7.2 x 3.66 x 1.97 in (18.3 x 9.3 x 5 cm) CT-400 Signal Clamp (AT-8030): Approx. 5.9 x 2.75 x 1.18 in (15 x 7 x 3 cm) |
| Weight | AT-8000-R Receiver: Approx. 1.20 lb (0.544 kg) AT-8000-T Transmitter: Approx. 1.25 lb (0.57 kg) CT-400 Signal Clamp (AT-8030): Approx. 0.25 lb (0.114 kg) |
View All Part Numbers