Starting at $139.82CAD
Configure
Dwyer

BAP - Bin Aerator Pad

Provides positive flow of dry, finely ground materials from any bin using the proven principle of aeration

Starting at
$139.82CAD
Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
Configure
Used in
BAP Bin Aerator Pad 07389

 Series BAP Bin Aerator Pad provides positive flow of dry, finely ground materials from any bin using the proven principle of aeration. Low pressure air is introduced into the product, restoring its natural ability to flow. In this way congestion, bridging and rat-holing are overcome without resorting to brute force. Almost all flow problems inherent to dry, fine materials are caused by compaction. When low pressure air is introduced to a finely ground material it will flow like water – uniformly and quickly. Series BAP is non-clogging and provides equal distribution and consumption of air. The aerator pads feature simple and quick installation, are inexpensive, and adapt to any bin configuration.

 
There are many advantages of the Bin Aerator Pad. It provides a positive, uniform, and easily controlled flow with quiet operation. Also, it yields first in/first out flow. Heavy-Duty construction features stiffeners to prevent crushing of air compartment. These stiffeners eliminate the possibility of the Bin Aerator Pad being crushed by a head of material or by a man stepping on it when cleaning bin. The stiffeners do not obstruct the diffusion of air.
 
The BAP-K bin aerator pad mounting kit completely eliminates the need to enter the bin to install or service bin aerator pads. By cutting a 2-5/8" x 6-3/8" hole in the bin wall, the mounting kit can be completely installed and serviced from outside of the bin. After the initial hole has been cut, the bin aerator pad can be mounted on the adapter assembly and inserted into the bin in less than two minutes. There are no other holes to drill, tapping or welding. The bin aerator pad is positively sealed and securely held in place in the bin. Removal is just as simple and quick.
 
Aeration gives the best results on materials with a 60 mesh size or smaller and with a 3% or less moisture content. Specific materials that respond well to aeration content are as follows: Lime, Portland Cement, Carbon Black, Diatomaceous Earth, Flour, Soda Ash, Gypsum, Fly Ash, Pigments, Soap Powders, Bentonite, Bran, Clay, Cereals, Fullers Earth, Detergents and many others.
• Provides positive, uniform, and easily controlled flow with quiet operation
• Non-clogging
Materials:See Catalog page.
Air Connection:1/8" NPT male.
Air Consumption:See Catalog page.
Supply Pressure:3 to 5 psi (0.2 to 0.3 bar).
Temperature Limit:BAP-C and BAP-SSC: 180°F (82°C); BAP-F and BAP-SSF: 600°F (316°C).

 • Powder and bulk

  • Thumbnail of document Data Sheet - BAP - Bin Aerator Pad
    Download

    Data Sheet - BAP - Bin Aerator Pad

    Download
  • Thumbnail of document Manual - BAP - Bin Aerator Pad
    Download

    Manual - BAP - Bin Aerator Pad

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!