Quickly locate leaks of combustible gases with the Model CLD20 Combustible Leak Detector. Unit provides accurate detection of Methane, Butane, Ammonia, Ethylene Oxide, Alcohols, Industrial Solvents and other combustible or toxic gases. Adjustable tick rate accelerates as the sensor tip approaches a leak and can be re-zeroed to pinpoint the exact location of the leak. The Model CLD20 offers visual LED indication of leak level and automatically recalibrates when turned off and on. Flexible gooseneck and small sensor head allows use in tight, difficult to reach areas.
• Flexible gooseneck with clip
• Visual leak detector
• Low battery indicator
• Power on light
• Solid state semi-conductor sensor
• Sensor cover
• Audible leak indicator
• Tic adjustment (located on side of the unit)
• Protective boot
• Socket for optional earphone
• Tip light
| Sensitivity | 50 ppm |
| Response Time | Less than 1 s |
| Sensor | Solid state semiconductor |
| Ambient Operating Temperature/RH | 32°F - 104°F (0°C - 40°C), 0% - 80% RH (non-condensing) |
| Power Requirements | 9 V alkaline battery, installed functional, user replaceable |
| Battery Life | Approximately 10 hrs of continuous usage |
| Warm-up | 10 s |
| Pre-programmed Fuels (partial listing) | Methane, Natural gas, Ammonia, Hydrogen, Butane, Propane, Acetone, Ethylene Oxide, Halon, Hydrogen Sulphide, Alcohol, Jet Fuel. Lacquers and Thinners |
| Alarm Settings | Audio: adjustable tick rate 75dB @ 1 ft (30 cm); Visual: flashing LED |
| Probe | 16 in (40 cm) length, flexible gooseneck |
| Dimensions (H x W x D) | 7.3 in x 3.4 in x 1.4 in (18.5 cm x 8.5 cm x 3.4 cm) |
| Weight | 18 oz (500 g) |
| Agency Approvals | CE |
| Dwyer CLD20 Combustible Leak Detector - Data Sheet 256.2 KB |
| Dwyer CLD20 Combustible Leak Detector - Manual 543.9 KB |
