Quick Links - Alpha Controls & Instrumentation Inc.
Social media
Contact information
Address
2900 John St.
Unit 4
Markham, ON L3R 5G3 - Canada
Phone
(905) 477-2133
Fax
(905) 477-4219
2900 John St.
Unit 4
Markham, ON L3R 5G3 - Canada
(905) 477-2133
(905) 477-4219
Measures from 0-25,000 microns with 0.1 micron resolution below 10,000 microns
Accurately measures vacuum in microns, pascals, millibar, mmhg & torr w/ a resolution down to 1 micron
Combines high accuracy, compactness, dependability, and low cost in an easy-to-read instrument
Indicate Positive, Negative or Differential, Accurate within 1%
Ideally suited for process, chemical and petroleum industry
High quality gauge designed to work with a pneumatic transmitter or controller
Used for low pressure corrosive media where diaphragm seal protection is needed
Ideal for pumps, compressors, hydraulic presses, machinery & motors that operate in harsh environments
Designed for sour gas applications requiring NACE Standards MR0175-2002
One piece forged brass case designed for severe service conditions
Unique pressure instrument utilizing colour coded cases for easy identification of processes
Economical 4.5” (115mm) stainless steel case gauge
Use where harmful vibration and pulsation are present
Use where harmful vibration and pulsation are present
Ideal for hydraulic and pneumatic installations requiring instrument orientation
Pulsation resistant, liquid filled stainless steel case
Designed for sour gas applications requiring NACE Standards MR0175-2002 (NACE Standards MR0103-2003 available)
Specifically designed to be utilized with tube fitting applications
Ideal for pumps, compressors, hydraulic presses, power packs and pneumatic equipment in industrial environments with extreme vibration and pulsation
A general-purpose gauge that is serviceable and pulsation resistant
General purpose panel mounted gauge with 1.5” (40mm) to 3.5” (90mm) dial sizes
Most economical, all-purpose pressure gauge
Economical pressure gauge and valve body assembly used for pressure testing
Used to measure pressure drops across a filter, pump or other equipment
Resistance-free differential gauge for all air and non-corrosive gas installations
Resistance-free differential gauge for all air and non-corrosive gas installations
Built to withstand the harshest of sanitary applications and where 3A approval is required
Ideal for commercial and industrial applications in both test measurement and general purpose installations
