`
Signal Transmitter for Load Cell & Strain Gage Application
Brand New DRST-BG MV Signal Transmitter converts bipolar mV signals from transducers supplied directly by the device to standard current/voltage signals.
Environmental Conditions | |
Operating Temperature | -20 to 60°C |
Calibration Temperature | 20 to 28°C |
Relative Humidity | < 95% RH (non-cond.) |
Protection Degree | IP50 |
Mechanical Specifications | |
Dimensions (HxWxD) | 80.5 x 35.5 x 84.5 mm (D is without pins) |
Weight Approx | 130 g |
Common Specifications | |
Supply Voltage | 19.2 to 28.8 Vdc |
Max Required Power | 7.2 W |
Internal Power Dissipation | 2.2 W |
Response Time (Programmable) | 0.06 to 999 s |
Signal/Noise Ratio | Min. 60 dB |
Updating Time | 20 ms |
Signal Dynamics, Input | 17 bit |
Signal Dynamics, Output | 16 bit |
Effect of Supply Voltage Change | < ±0.002% of span/%V |
Temperature Coefficient | < ±0.01% of span/°C |
Linearity Error | < 0.1% of span |
Auxiliary Voltage | Transducer |
Supply | 5 to 13 Vdc |
Load (Max.) | 230 mA |
EMC Immunity Influence | < ±0.5% of span |
Input Specifications | |
Common Input Specifications | |
Max. Offset | 70% of selec. max. value |
Voltage Input | |
Measurement Range | -40 to 100 mV |
Min. Measurement Range (Span) | 10 mV |
Input Resistance | > 10 MO |
Overrange | 0 to 999% of selected measurement range |
NPN, Digital Input | Pull up 24 Vdc / 6.9 mA |
PNP, digital Input | Pull down 0 Vdc/6.9 mA |
Trig Level Low, NPN/PNP | < 6 Vdc |
Trig Level High, NPN/PNP | > 10.5 Vdc |
Pulse Length | > 30 ms |
Output Specifications | |
Current Output | |
Signal Range | 0 to 20 mA |
Min, Signal Range | 5 mA |
Load ( @ Current Output | = 600 Ω |
Load Stability | = 0.01% of span/100 Ω |
Current Limit | < 23 mA |
Voltage Output Through Internal | |
Shunt | See manual for details |
Of Span | = of the presently selected range |
Observed Authority Requirements | |
EMC | 2014/30/EU |
EAC | TR-CU 020/2011 |
OMEGA DRST-BG DIN Rail Signal Conditioner for Load Cells - Manual 379.6 KB |