DewGen High Accuracy Dew Point Generator
Divided flow dew point generator to be used in the lab or the field, dew points from +15°C to frost points of -80°C
The Edgetech Instruments Model DewGen is a divided flow dew point generator that can generate dew points from +15°C to frost points of -80°C. The source gas is typically dry nitrogen and can be used as a stand-alone or used with an Edgetech Instruments Model DewMaster with an S3 chilled mirror dew point sensor resulting in a very accurate, NIST traceable calibration system.
The DewGen can go wherever needed, in the laboratory or in the field.
• Creates a known dew/frost point over a wide range
• NIST traceable when used with EdgeTech DewMaster
• High accuracy and repeatablity
• Constant regulated dew point output
• No electric power required - can go anywhere
• Ideal for portable applications
• Inherently explosion proof
| Dew/Frost Point Range: | -80°C to +15°C at 25°C ambient |
| Dew/Frost Point Adjustment: | Infinite Resolution |
| Accuracy: | ±0.5°C typical |
| Repeatability: | ±0.25°C |
| Stability: | ±0.25°C |
| Hysteresis: | None |
| Response Time: | Less than 3 minutes |
| Output Flow Rate: | 0 to 5 SCFH (0 to 2.5 liters/min) adjustable |
| Dimensions (HWD): | 11¼x 11¼x 25¾in. (28.6 x 28.6 x 65.4 cm) |
| Weight: | 15 lbs (6.8 kg) |
| Storage Temperature: | -40°C to +50°C |
| Input/Output Gas Connections: | ¼ in. (0.6 cm) compression fittings |
| Input Gas Requirement: | Dry gas less than 115 ppm (-40C dew point), 13 SCFH (6 liters/min), 30 to 100 psig |
| Edgetech DewGen High Accuracy Dew Point Generator - Data sheet 497.4 KB |
