ECA 450 Combustion Analyzer

Industrial-grade efficiency and environmental analyzer measures seven gases simultaneously, as well as pressure, air and stack temperature

Starting At
$8,429.00 CAD
Normally ships in 1-2 Weeks

Configure   Request Quote

Can We Help You?


Our product experts are here to help you find the right solution for your application!

The ECA 450 is an industrial grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently.

The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030 and state/local protocols including SCAQMD.

*Note: The ECA 450 calculates CO2 value based upon other measured values during the combustion process. It does not measure CO2 directly.

• Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles
• Sensors are easily replaced or upgraded in the field
• Rugged suitcase design with large, easy-to-read display
• Built-in printer for instant traceability and record-keeping

Measurements O2: 0 to 20.9%
CO (low-range, H2 compensated): 0 to 4,000 ppm
CO (high-range, optional): 4001 to 80,000 ppm
NO (optional): 0 to 3500 ppm
NO2 (optional): 0 to 500 ppm
SO2 (optional): 0 to 4,000 ppm
Combustibles (optional): 0 to 5% vol. (application dependent)
Stack temperature: -4 to 2400F (-20 to 1215C)
Primary / ambient air temperature: -4 to 999F (-20 to 537C)
Draft / differential pressure: 27.7 in H2O (69 mbar)
Power Internal rechargeable battery or via supplied wall adapter
Run Time 8 hours minimum
Size (H x W x D) 13.5 x 18.5 x 9 in. (34.3 x 47.0 x 22.9 cm)
Weight 25 lb. (11.3 kg)
Fuels[1] Natural gas, coal, oil 2/4/5/6, wood, kerosene, bagasse, propane, LPG, KOKS, LEG, biofuel
Operating Conditions Analyzer: 32 to 104 F (0 to 40 C), 15 to 90% RH (non-condensing), 1 ATM 10%
Probe tip[2]: 1472 F (800 C) maximum, 10 in H2O (25 mbar) maximum draft
Warm-up Time 60 seconds
Memory 1000 locations
Communications RS-232
Approvals CE mark
Warranty 1 year (including sensors)
[1] Depending upon combustion equation type see manual for details
[2] For standard 12 in. probe, P/N 0024-3023

• CO
• CO2
• NO
• NOx
• O2
• SO2
• SOx

O2 Sensor (2 yrs.) for the PCA3, Fyrite INSIGHT Plus, Fyrite InTech, and Monoxor Plus
Normally ships in 1-2 Weeks
$208.00 CAD
20 ft. hose extension for the PCA3 and ECA 450
Normally ships in 1-2 Weeks
$607.00 CAD
Printer paper (5 rolls) for the ECA 450
Normally ships in 1-2 Weeks
$40.00 CAD
Thermocouple for the PCA3, Fyrite INSIGHT Plus, and ECA 450
Normally ships in 1-2 Weeks
Starting At
$46.00 CAD
Replacement probe filters (3 pk.) for the water trap for the PCA3. Fyrite INSIGHT Plus. Fyrite InTech. Monoxor Plus. and ECA 450
Normally ships in 1-2 Weeks
$48.00 CAD
Replacement sensor CO/H2-compensated Low Range
Normally ships in 1-2 Weeks
$416.00 CAD