HC2A-ICXXX Standard Industrial Humidity Probe
Suitable for heavy industrial applications with through Wall installations
Suitable for Heavy Industrial Applications with Through Wall Installations
The ROTRONIC industrial probe is especially suitable for high temperatures and demanding industrial environments. It measures humidity and temperature and calculates the dew/frost point.
Applications
Production environments, high temperatures, industrial manufacturing, drying processes, climatic chambers
• Range of application: -100…200 °C / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh
| Probe type | Industrial probe |
| Operating range | -100…200 °C / 0…100 %rh |
| Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
| Accuracy w. adjustment profile "standard" | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
| Measuring range | -100...200 °C (short-term peak load) / 0...100 %rh |
| Power supply /power consumption | 3.3 V ± 0.1V / ~4.5 mA |
| Long-term stability | <1 %rh / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Probe protection | Filter carrier, brass nickel plated |
| Filter cartridge | Depending on the application, order separately |
| Response time T 63 | <15 sec. |
| Allowed wind speed | 3 m/s |
| Psychrometric calculations | Dew or frost point |
| Reproducibility airchip | <0.02 %rh / 0.01 K |
| Exploitation software | ROTRONIC HW4 |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Firmware update | With internet and HW4 software |
| User information | From Software HW4 (devicemanager) |
| Data processing via HW4 | With interface cables |
| Device protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analogue outputs scaleable by the user | Yes |
| Analogue output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Sensor frame for %RH and °C sensor | Yes |
| Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable |
| Probe material | PEEK |
| FDA / GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Dimensions | Ø15 x 100 mm / Ø15 x 250 mm / Ø15 x 400 mm / Ø15 x 550 mm / Ø15 x 700 mm |
| Weight | 230 g / 260 g / 290 g / 330 g / 350 g / |
View All Part Numbers