HC2A-IEXXX Screw-In Cable Probe
Stainless steel probe for pressurized conduits and vessels, suitable for high temperatures, demanding industrial environments and areas where hygiene plays an important role
Stainless Steel Probe for Pressurized Conduits and Vessels
The metal industrial probe is especially suitable for high temperatures, demanding industrial environments and areas where hygiene plays an important role. The probe measures humidity and temperature and calculates the dew/frost point.
Applications
Food and pharmaceutical production, drying processes, industrial manufacturing
• Range of application: -100…200 °C, (screw-in probe; -50…200 °C) / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh
| Probe type | Screw-in probe |
| Operating range | -100…200 °C / 0…100 %rh |
| Accuracy at 23 ±5 °C | ±0.8 %rh / ±0.1 K |
| Accuracy w. adjustment profile "standard" | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
| Power supply / Power consumption | 3.3 V ± 0.1V / ~4.5 mA |
| Long-term stability | <1 %rh / year |
| Humidity sensor | Hygromer IN-1 |
| Temperature sensor | PT100 1/3 DIN Class B |
| Probe protection | Filter carrier, brass nickel plated |
| Filter cartridge | Depending on the application, order separately |
| Pressure | Pressure-resistant to 100 bar / 1450 PSI |
| Response time T 63 | <15 sec. |
| Allowed wind speed | 3 m/s |
| Psychrometric calculations | Dew or frost point |
| Connection thread of probe | 1/2" G / 1/2" NPT |
| Reproducibility airchip | <0.02 %rh / 0.01 K |
| Exploitation software | ROTRONIC HW4 |
| Probe adjustment by software | 1 Point & multipoint %rh & °C |
| Firmware update | With internet and HW4 software |
| User information | From Software HW4 (devicemanager) |
| Data processing via HW4 | With interface cables |
| Device protection by password | Yes |
| Type of output signals | 2 x 0…1 VDC |
| Analogue outputs scaleable by the user | Yes |
| Analog output signal (standard) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| Digital output signal (standard) | UART |
| Service interface | UART |
| Reverse voltage protection | Mechanically in the connector |
| Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable |
| Probe material | Stainless steel 1.4305 (V2A) |
| Probe cable material | FEP, black |
| Enclosure material | Stainless steel 1.4305 (V2A) |
| FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
| Weight | 290 g |
View All Part Numbers