` LDX-2 LVDT Signal Conditioner, Loop Powered for AC LVDT

OMEGA

LDX-2 LVDT Signal Conditioner, Loop Powered for AC LVDT

LVDT Signal Conditioner, Loop Powered for AC LVDT's

Call Today!
800-567-8686 Normally ships in 2-3 Weeks

  Request Quote

Can We Help You?

CALL US   EMAIL US   CHAT LIVE

Our product experts are here to help you find the right solution for your application!

 The LDX-2 linear displacement transmitter is a two-wire, 4 to 20 mA conditioner for ac LVDT transducers. It is designed for use where long transmission distances are required before the signal can interface with a controller or meter. A feature of two-wire operation is its low susceptibility to noise and cable resistance, making it ideal for industrial environments. Two-wire operation enables both power and signal to use the same pair of wires.

• Wide Input Range of 30 to 530 mV/V
• Rugged Sealed Housing
• 2-Wire 4 to 20 mA Signal for Remote Locations
• 0.02% of Reading Accuracy

Power Supply 13 to 48 Vdc, up to 30 mA
Supply Protection Reverse polarity protected
Transducer Drive 0.9 V rms @ 5 kHz nominal, 13 kHz switchable
Oscillator Protection Open and short circuit protected
Transducer Sensitivity Range 30 to 530 mV/V in 2 coarse gain positions
Range of Gain Control 3.5 to 1 switched, 5 to 1 adjustable
Range of Zero Control Up to 100% on max gain
Output Current 4 to 20 mA 2-wire or 0 to 20 mA 3-wire
Output Impedance Effectively infinite
Output Protection Open and short circuit protected
Output Ripple <50 µA pk to pk @ 10 kHz
Output filter Cut off frequency -3 dB @ 25 Hz second order linearity: <0.02%
Operating temp. Range 0 to 70°C (32 to 158°F)
Storage Temp Range -40 to 80°C (-40 to 176°F)
Temperature Coefficient Zero, better than 0.01% FS/°C; Gain, better than 0.01% FS/°C
Long Term Stability Zero, 0.2%/year typical; Gain, 0.3%/year typical
Effect of Supply Change Negligible
Terminations Screw terminals. Access through two cable ports for wires 1 to 5 mm (0.04 to 0.2") diameter
Mechanical
Weight 220 g (7.7 oz)
Mounting Through holes in base by 2 screws and nuts; can be mounted to DIN 46277-1 rail
Accessories Included 2 fixing screws and nuts
Environmental Sealed to NEMA 12 ( IP65)
Dimensions 54.5 H x 80 W x 108 mm L (2.13 x 3.12 x 4.21")


Your Recently Viewed Items...