`
DIN Rail Mount Signal Conditioners for AC LVDT Transducers
The LDX-D is a DC-powered conditioning module that can accept a wide range of analog inductive transducer types owing to its wide input gain. The signal polarity, span, and offset are adjustable. Output is selectable: ±10 Vdc voltage or ±20 mA current. The housing is a standard DIN rail enclosure that can clip directly to a 35 mm top-hat rail (TS35 EN50022). Transducers are connected via the screw terminals on the front of the LDX-D. Internal links and front-panel fine-adjustment potentiometers facilitate setup. By linking 2 LDX-D modules, users can perform some analog arithmetic functions, such as A + B, A B, (A + B)/2 and (A B)/2.
Power Requirement | 10 to 30 Vdc |
Supply Current | |
Voltage Range | 140 mA @ 10 Vdc, 60 mA @ 30 Vdc |
Currant Range | 160 mA @ 10 Vdc, 70 mA @ 30 Vdc |
Transducer Excitation | |
Primary Voltage | 3 Vrms nominal |
Primary Frequency (kHz) | 5-, 10- or 13-link selectable |
Signal Input | |
Input Range | 55 to 5000 mV |
Input Load Resistance | 100 kΩ |
Signal Output | |
Voltage Output | Up to ±10 Vdc |
Current Output | Up to 20 mA into 150 Ω load |
Output Ripple | <1 mVrms |
Output Offset | Up to 100% |
Temp Coefficient Gain | <0.01% FSO/°C |
Temp Coefficient Offset | <0.01% FSO/°C |
Warm-Up | 15 minutes recommended |
Linearity | <0.1% FSO |
Bandwidth (-3 dB) | 500 Hz or 1 kHz, link selectable |
Environmental | |
Operating Temp | 0 to 60°C (32 to 140°F) |
Storage Temp | -20 to 85°C (-4 to 185°F) |
Mechanical | |
Transducer | Screw terminals |
Power Supply | Screw terminals |
Output Signal | Screw terminals |
Weight | 120 g (4.2 oz) |
Case Material | Green polyamide |
OMEGA LDX-D DIN Rail Signal Conditioner for AC LVDT Transducers - Data sheet 160.7 KB |
OMEGA LDX-D DIN Rail Signal Conditioner for AC LVDT Transducers - Manual 1.2 MB |