MFT4000 Series Pressure Sensor Modules
Pressure sensor modules for use with MFT4000 and MFT 4010 calibrators, available in several types and ranges
Pressure Sensor Modules from Meriam Process Technologies are available in a several types and ranges to provide the ultimate in flexibility and convenience for portable calibration standards. Calibration coefficients for all modules are stored in non-volatile sensor module memory. This means any pressure module can be used in any Meriam MFT without manual programming of coefficients. Engineering units, including PSI, centimeters or inches of H2O (at 4°C, 20°C, or 60°F), kg/cm2, kPa, mBars, Bars, millimeters, inches of Hg (at 0°C ref. temp) and oz/in2 are all selectable from the MFT keypad.
• NIST traceable accuracy of ± 0.025% FS
• All effects of linearity, hysteresis, repeatability and temperature from 23°F - 122°F
• Several types and ranges are available
• Modules are completely interchangeable to facilitate most pressure testing needs
• Can be recalibrated in the field
| Storage Temperature | -40°C - 60°C (-40°F - 140°F) |
| Operating Temperature | -5°C - 50°C (23°F - 122°F) |
| Connections | 1/8 in FNPT, 316 SS |
| Model Codes and Uses | xDN: Differential Non-isolated – clean, dry, noncorrosive gases only xGI: Gauge Isolated – medias compatible with 316SS xAI: Absolute Isolated – medias compatible with 316SS |
| Pressure Limits | xGI / xAI modules: 2X range / 316ss compatible xDN modules: 2X range when pressurized on high side only, 150 PSI when applied simultaneously to high and low sides |
| Certifications | CE Mark (standard) NIST traceability certificate (standard) Intrinsically Safe, MET Laboratories per CSA C22.2 & UL Class I Division I (standard on all pressure modules) |
View All Part Numbers