Automation Products Group
MPXI-F
A flexible proprietary-PVDF or 316L SS braided-tubing stem for easy installation in tall tanks
The MPXI-F Explosion Proof Flexible SS and PVDF Stem Magnetostrictive Level Sensor is easy to install, every time. World-wide, explosion-proof/flame-proof installation? Easy. Flexible stem for crane-less installation in tanks up to 50 feet tall? Easy. Optional temperature sensors and high-level switch for extra protection? Easy.
MULTIPLE OUTPUT CHOICES
Because the MPXI-F carries explosion-proof installation certifications, you can run Modbus network lines right up to each sensor without worrying about IS barriers. Or choose loop-powered 4-20 mA sensors for easy 2- or 4-wire hook up.
TANK CLOUD COMPATIBLE
The MPXI-F liquid level sensor is a Tank Cloud client sensor, able to communicate via the Internet with the addition of an LOE server sensor (Modbus output only) or an RST-5003 module (Modbus or 4-20 mA output).
QUICK START-UP
With its low-power-consumption design, and a start-up time of under five seconds, the MPXI-F level sensor makes battery power for remote installations easy.
FLEXIBLE
The MPXI-F is designed for easy installation. The both the proprietary-PVDF stem and the 316 SS flexible tubing stem coil for compact shipping and on-site transportation. And with the stem weight attached, they uncoil easily into your tank, so you no longer need a flat bed truck and an 60-foot crane to install a 30-foot probe in a 30-foot tank.
OPTIONS
The PVDF MPXI-F level sensor has an optional high-level switch (located 23.5" below probe zero reference) that is wired to independent of sensor operation. So even in the event of probe failure, you'll still get the high level alert. And both stem types allow for up to seven temperature sensors evenly spaced along the stem, providing real-time temperature output from inside your tanks.
• Class I, Division 1, and Class I, Zone 0/1 Hazardous Location Ratings (cCSAus, ATEX, IECEx)
• Explosion Proof housing for easy conduit connections
• Zone 0-rated stem electronics
• 4-20 mA (single or dual) or RS-485 (Modbus RTU) output
• Stainless steel probe lengths up to 32 feet (9.75 m)
• PVDF probe lengths up to 50 feet (15.2 m)
• Optional electrically-redundant high-level switch (PVDF only)
• Up to seven temperature sensors
• Highly accurate and reliable readings
• Dual level (interface) measurement
• Tank volume or level output, strapping table
• C I, D 1 Hazardous Locations
• C I, Z 0/1 Hazardous Locations
• Tall Storage Tanks
• Oil/Water Interface Measurement
• Thick, Viscous, Sludgy Fluids
• Industrial Effluent
• Pulp and Paper
• Biotech
• Oil and Gas
• Petrochemical
• Chemical
Request a Service Quote
Get a customized quote for calibration, validation, repair, or training services designed to keep your instruments accurate and compliant.
Learn moreBrowse By Brands
Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more